3820 UG.book - Finn-ID

Code 39, continuedCode 39 Check CharacterNo Check Character indicates that the scanner reads and transmits bar codedata with or without a check character.When Check Character is set to Validate, but Don’t Transmit, the unit onlyreads Code 39 bar codes printed with a check character, but will not transmit thecheck character with the scanned data.When Check Character is set to Validate and Transmit, the scanner only readsCode 39 bar codes printed with a check character, and will transmit this characterat the end of the scanned data. Default = No Check Character.* No Check CharacterValidate, but Don’t TransmitValidate and TransmitCode 39 Message LengthScan the bar codes below to change the message length. Refer to MessageLength on page 6-2 for additional information. Minimum and Maximumlengths = 0-48. Minimum Default = 0, Maximum Default = 48.Minimum Message LengthMaximum Message Length6 - 6 2020/3820 User’s Guide