3820 UG.book - Finn-ID
3820 UG.book - Finn-ID
3820 UG.book - Finn-ID
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
2Terminal InterfacesTerminal <strong>ID</strong>If your interface is not a standard PC AT, refer to "Supported Terminals" on page2-2 through page 2-3, and locate the Terminal <strong>ID</strong> number for your PC. Scan theTerminal <strong>ID</strong> bar code below, then scan the numeric bar code(s) from theProgramming Chart inside the back cover of this manual to program the scannerfor your terminal <strong>ID</strong>. Scan Save to save your selection.For example, an IBM AT terminal has a Terminal <strong>ID</strong> of 003. You would scan theTerminal <strong>ID</strong> bar code, then 0, 0, 3 from the Programming Chart inside the backcover of this manual, then Save. If you make an error while scanning the digits(before scanning Save), scan the Discard code on the Programming Chart, scanthe Terminal <strong>ID</strong> bar code, scan the digits, and the Save code again.Note: The default interface for the 2020-5B is Keyboard Wedge (Term <strong>ID</strong> =003).Terminal <strong>ID</strong>SaveNote: After scanning one of these codes, you must power cycle your computer.2020/<strong>3820</strong> User’s Guide 2 - 1
Change language