HYDRAULIC EXCAVATOR - CablePrice

ZAXIS-3 seriesHYDRAULIC EXCAVATORModel Code : ZX110-3 / ZX110M-3Engine Rated Power : 69 kW (93 HP)Operating Weight : ZX110-3 : 10 900 - 11 300 kgZX110M-3 : 13 100 - 14 000 kgBackhoe Bucket : SAE, PCSA Heaped : 0.19 - 0.59 m 3CECE Heaped : 0.17 - 0.50 m 3

The Power to PerformProductivityNew E-modeMulti function monitorMaintenance supportSafety measuresCRES II cabThe ZAXIS-3 series is a new generation of excavators designedto provide more efficient power, productivity and improvedoperator comfort. By listening carefully to the wishes of theend-user, HITACHI not only understands your business, but alsoprovides the reliable solutions you’ve been looking for.HIOS II hydraulic systemNew electronic controlled diesel enginePage 4-5Operator comfortHigh visibility inside cabShort stroke leversAttachment support systemRear view camera (optional)Theft deterrent systemFuel consumption monitoringPage 8-9Durability and reliabilityCab right protection barsPilot control shut-off leverEngine shut-off switchPage 14Environment measuresArray of low noise mechanismsWide foot spaceStrengthened X beamEcological designComfort designed seatImproved idler bracketsPage 15Improved controlability and operatorcomfortStrengthened front attachmentPage 10-11Parts & servicePage 6-7MaintenanceConveniently located inspection pointsPage 16Muddy terrain versionNEW AND IMPROVEDParallel arrangement of the coolingpackPage 12-13Page 18SpecificationsPerformance:8% higher productionPage 19-27Comfort:Excellent visibilityEnhanced controllabilityLower noise levelNew equipment:Rear view camera (optional)Theft deterrent systemThe new engine complieswith the Emission RegulationsEU Stage III AThe advanced low noisedesign complies withthe coming EU noiseregulation 2000 / 14 / EC,STAGE IIReduced running costs:Lower fuel consumption per m 3Improved durability and reliabilityNotes : The images in this catalog show excavators with an optional blade attachment installed. Some of the pictures in this catalogshow an unmanned machine with attachments in an operating position. These were taken for demonstration purposes onlyand the actions shown are not recommended under normal operating conditions.

More production, less fuel consumptionIncreased ProductionA combination of the hydraulic system(HIOS*II) and new DOHC 4-valve engineallows the efficient use of hydraulicpressure to increase speeds ofactuators and boost production withhigher fuel efficiency. The productivityis increased 8% in comparison toprevious model ZAXIS-1.New E-modeThe new E mode, H/P mode andP mode can be selected to suit jobneeds. The new E mode can save fuelconsumption by up to 7% comparedto the previous model’s P mode, whileyielding similar production.Sophisticated Travel ControlAt climbing or steering, when themachine needs more traction force,the engine speed automaticallyincreases which makes the machinefaster.*Human & Intelligent Operation SystemEfficient hydraulic control - HIOS IIHIOS II Hydraulic SystemThe HIOS II hydraulic system elicits more user satisfaction than other models on themarket due to its greater operator comfort and ease of operability.Our ZAXIS-3 model not only adopts this technology but also improves it, addingseveral enhancements over previous models. It offers a balance between theoperability of the front attachment arm and its manoeuvring speed, resulting in animproved capacity to handle combined operations with maximum stability duringexcavation.Development concept of new engineDOHC* 4-Valve EngineThe new DOHC 4-valve diesel engine isdeveloped and built to comply with therigorous Emission Regulations enforcedin 2008 in U.S and EU. This newengine contributes to environmentalpreservation. At the same time itrealizes high durability and low fuelconsumption by adapting the latestadvanced engine technology.*Double Overhead CamshaftCommon Rail Type Fuel InjectionSystemElectronic control common rail type fuelinjection system drives an integratedfuel pump at an ultrahigh pressure todistribute fuel to each injector percylinder through a common rail.This enables optimum combustion togenerate big horsepower, and reducePM* (diesel plume) and fuelconsumption.*Particulate MatterCooled EGR* SystemThe cooled EGR system lets partof exhaust gasses mix with intakeair for re-combustion to reduceoxygen concentration in the air in thecombustion chamber. This designlowers combustion temperature in thecylinder, reducing fuel consumption andNOx while yielding more horsepower.*Exhaust Gas RecirculationBoosted ProductivityFuel FilterFuel PumpCommon Rail Pressure SensorCommon RailCoolantEGR CoolerControlUnitEGRControl ValveNew hydraulic system HIOS II and new DOHC 4-valve diesel engine were developed for ZAXIS-3.These advanced technologies are at work to yield bigger output with higher fuel efficiency.IntakeCylinder HeadFuel Tank Control Unit InjectorExhaust

A New Standard in Operator ComfortThe operator's seat of the ZAXIS-3 series gives the operatoran excellent view of the jobsite.Ample legroom, short stroke levers and a large seat ensureoptimum working conditions for the operator during longhours.The ZAXIS-3 series cab has beenredesigned to meet demands ofcustomers. From the operator’s seatthe operator has an excellent view ofthe jobsite. On the widescreen colorLCD monitor the operator can seemachine conditions and with the rearview camera (optional), what is behindthe machine. Ample legroom, shortstroke levers and a comfortable seatensure optimum working conditions.The seat features horizontal, verticaladjustments and has a backrestcontoured for comfort, with a HITACHIlogo.Wide adjustable armrests and a retractable seat belt are included. Short stroke leversallow for continuous operation with less fatigue. Three switches on the lever (optional)can be set to operate attachments other than buckets. The cab is pressurized to keepout dust. Noise and vibrations are kept to a minimum due to the elastic mounts, filledwith silicone oil, the cab rests on.Visibility is improved especially for the right downward view. Sliding windows on thefront and side enable direct communication between operator and other workers. Footspace has increased and travel pedals have been redesigned for easier operation.A flat floor allows for easy cleaning. Ergonomic controls and switches, fully automaticair conditioner and a radio complete the package.

Embedded Information TechnologyThe ZAXIS-3 series is equipped with a widescreen color LCDmonitor with adjustable contrast for day and night shifts.With the monitor the operator can check maintenance intervals,select work modes, monitor fuel consumption, and connectto the rear view camera (optional). A theft deterrent system andmulti-language selection is also available.Multi function monitorRear view camera (optional)Attachment support system(work mode selector)Theft deterrent systemThe color LCD monitor, located in thecab, indicates coolant temperature,fuel level, and maintenance data. It alsoallows one-touch adjustment of theattachment. The display can also beadjusted to day or night shift.Maintenance supportWhen replacing the attachment, oil flowadjustment can automatically be doneby one touch on the work modeselection display on the LCD monitor.Minor adjustments of oil flow ispossible if necessary.The electronic immobiliser requires theentry of an encryption code to themultifunctional monitor each time whenstarting the engine to prevent theft andvandalism.The widescreen color LCD, in tandemwith the rear view camera on thecounterweight, provides a convenientview of the area behind the unit.The rear view camera automaticallyworks when travelling backward, andcan also be manually turned on with aselect switch on the monitor.Multi-language selectionFuel consumption monitoringReplacement timing of hydraulic oiland fuel filters is alerted to the operatorthrough the LCD monitor according tothe schedule preset by the user eachtime when turning the key switch.The scheduled maintenance canprevent the failure of the machine.The menu allows selection from12 languages.Fuel consumption per operating hour iscomputed, and the result is displayedon the LCD monitor. This informationsuggests refuelling timing, and guidesenergy-saving operation and efficientjob management.*The indicated values are examples and could differ fromthose in actual operation.

A Solid Base for a Long LifeStrengthened X beam and side framesHITACHI’s technology is built on a wealth of experience andknow-how from a variety of demanding conditions around theworld. The undercarriage of the ZAXIS 110 has become muchstronger. Improved construction and enlarged box sections,a track undercover plate that protects the center joint andhydraulic hoses make this machine more durable.The X-beam is strengthened by the improved construction and enlarged box sections.Top and bottom plates of the X-beam use monolithic plates, instead of conventionalwelded four plates. This eliminates welding to strengthen the X-beam.Strengthened idler bracketsThe idler bracket is widened.Reinforcing plate is also attached to prevent the opening of the idler bracket.Idler bracketreinforcing plateIncreasedbracket widthStrengthened front attachmentAt arm-bucket joint, the arm top is hardened with WC thermal spraying (Tungsten-Carbide) for greater wear resistance at its contact surface with bucket, reducingjerking. Reinforced resin thrust plates designed to reduce noise and resist wear.The new HN bushings, containing “solid molybdenum-based lubricant”, areutilized at the boom-arm joint and arm cylinder mounting area for better lubricationand higher durability. (At other joints, conventional HN bushings are also utilized.)New HN bushingWC Thermal sprayingReinforced resin thrust plates1011

Simplified MaintenanceConveniently located inspection pointsThe ZAXIS-3 series meet customer demands for simplifiedmaintenance. Regular maintenance is the key for keepingequipment in top condition, which can help to prevent costlydowntime. In addition, a regular serviced machine has higherresidual value. There are many service features to be found onthe ZAXIS-3 series.Wide doors give access, from ground level, to the fuel filter, water separator andengine oil filter. A large handrail, steps and anti-skid plates lead to the engine cover.The engine oil pan is fitted with a drain coupler. When draining, an associated drainhose is connected to the drain coupler. The drain coupler is reliable, avoiding oilleakage and vandalism.The fresh air filter for the air conditioneris relocated to cab door side fromconventional location behind theoperator seat. This allows easy cleaningand replacement of the fresh air filter,like the air circulation filter inside thecab.Parallel arrangement of the cooling packEasy removal ofdebris and dirtfrom blower, etc.EngineOil CoolerRadiatorIntercoolerThe oil cooler, radiator and intercooler are laid out in a parallel arrangement, insteadof the conventional in-line arrangement. This parallel arrangement is significantlyeasier to clean around the radiator.Parallel ArrangementExtended oil and filter change intervalsFront Pin Lubricating Intervals and Consumables ReplacementLubricant BucketBoom FootFrontConsumables Engine OilEngine Oil FilterHydraulic OilHydraulic Oil FilterFuel FilterNew ZAXIS 110500 h500 h500 h500 h500 h5 000 h1 000 h500 hThe oil and filter change intervals havebeen extended considerably,reducing maintenance time andexpenses. Engine oil consumption islower. Hydraulic oil can be used up to5 000 hours.The photo shows an excavator with an optional blade and electric fuel refilling pump installed.1213

Safety FeaturesEnvironmental FeaturesEnsuring the safety of the operator and other workerson the jobsite is an important concern for HITACHI.That is why the ZAXIS-3 series has a number ofsafety features including a new reinforcedcab and shut-off mechanisms for engineand pilot controls.HITACHI acts responsibly when it comes to the environment.Our production facilities have ISO 14001 certification.The HITACHI machine is lead free and has a low-noisedesign, therefore HITACHI customers get one of the mostenvironmentally considerate hydraulic excavatorsavailable today.CRES II cabThe CRES II cab is designed to help with “just in case” protection for the operator.Safety in case of tipping is improved. The cab top, for instance, can withstand about2.5 times conventional load when side load is applied to the cab top until itsdeformation reaches 200 mm.A cleaner machineThe ZAXIS-3 series is equipped with a clean but powerful engine to comply with Tier 3,and Stage III A. An engine emission regulations effective in the U.S. EPA and EuropeanUnion from 2008. Exhaust gas is partly re-combusted to reduce particulate matter (PM)output and lower nitrogen oxide (NOx) levels.Withstanding load : 2.5-fold increaseAdditional featuresCab right protection barsEvacuation hammerEngine shut-off switchA quieter machineA number of features make this machine quieter. First, isochronous control of theengine speed means a restriction of engine speed during no-load and light-dutyoperation to suppress sound. A fan with curved blades reduces air resistance and airflow noise. Third, a time-tested muffler suppresses engine noise significantly.Pilot control shut-off leverOPG Top Guard, Level IIRetractable seat beltA recyclable machineAll resin parts are marked to facilitate recycling. The machine is completely lead-free.The radiator and oil cooler are made from aluminium and all wires are lead-less.In addition, biodegradable hydraulic oil is available for jobsites where specialenvironmental care is required.(optional)Other features include a retractable seatbelt, evacuation hammer and emergencyengine shut-off switch. A shut-off lever for pilot control helps to prevent unintentionalmovements. In addition an Operator Protective Guard (OPG top guard, Level II) isoptionally available. For the cab windows there is a choice of laminated or temperedglass.14 15

Parts & ServicePartsOver the years, we have gained experience in one of the mostcompetitive service markets in the world - Japan.Using our know-how in dealing directly with customers, we havecreated a worldwide support system that is highly capable.HITACHI only offers genuine highquality parts. We guarantee that theseparts have high performance and longlife. We manage around 1 000 000 typesof parts all around the world. They aredesigned and built to be the best matchfor your HITACHI equipment. HITACHIhas a global parts distribution networkthat makes sure you get what you needas quickly as possible. We have morethan 150 dealers worldwide who providethe closest support for your needs. Inmost cases, your dealer will have thereplacement part that you require. If adealer does not have a certain part, hecan order it from four fully stocked partsdepots located across the world. Thesedistribution centres are all connectedby an on-line system that gives themaccess to shared information onstocks, such as the number and typeof available parts. The depots, which inturn are stocked by a parts center inJapan, minimize delivery time andenable you to get your parts asefficiently and quickly as possible.ServiceOur goal is to “keep customerequipment at a maximum performancelevel”. To fulfil this goal, we haveset more than 150 dealers all overthe world. They have highly trainedtechnicians, and provide a number ofsupport programs.HITACHI provides a unique extendedwarranty program called HITACHIExtended Life Program, or HELP.To minimize downtime duringtroubleshooting, we developed a PDAbased diagnostic system called “Dr.ZX”.To keep our customers’ equipmentin top running shape, good service isindispensable. We believe personneltraining is the key to providing the bestservice.If you would like more informationregarding parts and/or service, pleaseask your nearest HITACHI dealer. Not allprograms and/or services areavailable in every market or region.Machine (ZAXIS 225US) includes optional equipment installed by customer.16 17

Muddy Terrain Version M-SeriesStrong demand for efficient operations on softground and gradient.ZAXIS 110MIncreased traction force and upgraded durabilityUsing the 20-ton class travel devices, traction force increases 43% overthe ZAXIS 110.More efficient operation even on soft ground or muddy terrain by using 700 mmtriple grouser shoe and long crawlerLow ground pressure: 28 kPa* (ZAXIS 110: 38 kPa).* Operation with standard specification (operating weight: 13 100 kg)Minimum ground clearance and upperstructure ground clearance greaterthan ZAXIS 110Minimum ground clearance: 595 mm (ZAXIS 110: 440 mm).Upperstructure fround clearance: 1 100 mm (ZAXIS 110: 890 mm).Wide track gaugeUsing a wide track gauge, stable operation is easily achieved.EQUIPMENTSPECIFICATIONSENGINEModel ........................ Isuzu AJ-4JJ1XType ........................... 4-cycle water-cooled, direct injectionAspiration .................. Turbocharged, intercooledNo. of cylinders .......... 4Rated powerISO 9249, net ........ 69.0 kW (93.0 HP) at 2 000 min -1 (rpm)EEC 80/1269, net... 69.0 kW (93.0 HP) at 2 000 min -1 (rpm)SAE J1349, net ..... 69.0 kW (93.0 HP) at 2 000 min -1 (rpm)Maximum torque ........ 372 N·m (38 kgf·m) at 1 600 min -1 (rpm)Piston displacement ... 2.999 LBore and stroke ......... 95.4 mm x 104.9 mmBatteries .................... 2 x 12 V / 55 AhHYDRAULIC SYSTEM• Work mode selectorDigging mode / Attachment mode• Engine speed sensing systemMain pumps ............... 2 variable displacement axial piston pumpsMaximum oil flow ... 2 x 111 L/minPilot pump ................. 1 gear pumpMaximum oil flow ... 33.6 L/minHydraulic MotorsTravel .........................Swing ........................2 variable displacement axial piston motors1 axial piston motorRelief Valve SettingsImplement circuit ....... 34.3 MPa (350 kgf/cm 2 )Swing circuit .............. 31.3 MPa (319 kgf/cm 2 )Travel circuit ............... 34.3 MPa (350 kgf/cm 2 )Pilot circuit ................. 3.9 MPa (40 kgf/cm 2 )Hydraulic CylindersHigh-strength piston rods and tubes. Cylinder cushion mechanismsprovided in boom and arm cylinders to absorb shock at stroke ends.DimensionsQuantity Bore Rod diameterBoom 2 95 mm 70 mmArm 1 105 mm 75 mmBucket 1 95 mm 65 mmHydraulic FiltersHydraulic circuits use high-quality hydraulic filters. A suction filter isincorporated in the suction line, and full-flow filters in the return line andswing/travel motor drain lines.UPPERSTRUCTURERevolving FrameWelded sturdy box construction, using heavy-gauge steel plates for ruggedness.D-section frame for resistance to deformation.Swing DeviceAxial piston motor with planetary reduction gear is bathed in oil. Swingcircle is single-row, shear-type ball bearing with induction-hardened internalgear. Internal gear and pinion gear are immersed in lubricant. Swingparking brake is spring-set/hydraulic-released disc type.Swing speed .............. 13.9 min -1 (rpm)Swing torque ............. 33.0 kN·m (3 370 kgf·m)Operator's CabIndependent spacious cab, 1 005 mm wide by 1 675 mm high, conformingto ISO* Standards. Reinforced glass windows on 4 sides for visibility.Front windows (upper and lower) can be opened. Reclining seat witharmrests; adjustable with or without control levers.* International Standardization OrganizationUNDERCARRIAGETracksTractor-type undercarriage. Welded track frame using selected materials.Side frame welded to track frame. Lubricated track rollers, idlers, andsprockets with floating seals.Track shoes with triple grousers made of induction-hardened rolled alloy.Heat-treated connecting pins with dirt seals. Hydraulic (grease) trackadjusters with shock-absorbing recoil springs.Numbers of Rollers and Shoes on Each SideUpper rollers .............. 1 : ZX110-32 : ZX110M-3Lower rollers .............. 6Track shoes ............... 41 : ZX110-342 : ZX110M-3Track guard ................ 1 : ZX110M-3Travel DeviceEach track driven by 2-speed axial piston motor through planetary reductiongear for counterrotation of the tracks. Sprockets are replaceable.Parking brake is spring-set/hydraulic-released disc type. Travel shocklessrelief valve built in travel motor absorbs shocks when stopping travel.Automatic transmission system: High-Low.Travel speeds ............. High : 0 to 5.5 km/h : ZX110-30 to 4.2 km/h : ZX110M-3Low : 0 to 3.6 km/h : ZX110-30 to 2.4 km/h : ZX110M-3Maximum traction force .. 91 kN (9 300 kgf) : ZX110-3130 kN (13 300 kgf) : ZX110M-3Gradeability ................ 70% (35 degree) continuousCONTROLSPilot controls. Hitachi's original shockless valve.Implement levers ........ 2Travel levers withpedals ........................ 218 19

SPECIFICATIONSWEIGHTS AND GROUND PRESSUREZX110-3Equipped with 4.27 m boom, 2.26 m arm and 0.45 m 3 (SAE, PCSAheaped) bucket.Shoe type Shoe width Operating weight Ground pressureTriplegrouser500 mm 10 900 kg 37 kPa (0.38 kgf/cm 2 )600 mm 11 100 kg 31 kPa (0.32 kgf/cm 2 )700 mm 11 300 kg 27 kPa (0.28 kgf/cm 2 )Flat 510 mm 11 300 kg 37 kPa (0.38 kgf/cm 2 )Triangular 700 mm 11 200 kg 27 kPa (0.28 kgf/cm 2 )ZX110M-3Equipped with 4.27 m boom, 2.26 m arm and 0.45 m 3 (SAE, PCSAheaped) bucket.Shoe type Shoe width Operating weight Ground pressureTriplegrouserSinglehighgrouserTriangular700 mm 13 100 kg 28 kPa (0.29 kgf/cm 2 )800 mm 13 400 kg 25 kPa (0.26 kgf/cm 2 )900 mm 13 600 kg 23 kPa (0.23 kgf/cm 2 )960 mm 14 000 kg 22 kPa (0.22 kgf/cm 2 )760 mm 13 800 kg 27 kPa (0.28 kgf/cm 2 )900 mm 13 600 kg 23 kPa (0.23 kgf/cm 2 )ZX110-3 with Blade (Optional):Equipped with 4.27 m monoblock boom, 2.26 m arm and 0.45 m 3(SAE, PCSA heaped) bucket.Shoe type Shoe width Operating weight Ground pressureSERVICE REFILL CAPACITIESFuel tank .................................................................................... 250.0 LEngine coolant ............................................................................. 16.0 LEngine oil ..................................................................................... 17.0 LSwing device .................................................................................. 3.2 LTravel device .................................................................................. 4.0 L(each side)Hydraulic system ........................................................................ 170.0 LHydraulic oil tank .......................................................................... 70.0 LBACKHOE ATTACHMENTSBoom and arms are of welded, box-section design. 4.27 m boom and 1.96 m, 2.26 m and 2.81 m arms are available.BUCKETSCapacitySAE, PCSA heapedCECE heapedWithoutside cuttersWidthWithside cuttersNo. ofteethWeight0.19 m 3 0.17 m 3 450 mm 550 mm 3 260 kg0.30 m 3 0.25 m 3 580 mm 700 mm 3 290 kg0.40 m 3 0.33 m 3 680 mm 800 mm 4 340 kg1.96 marmZX110-32.26 marm0.45 m 3 0.40 m 3 850 mm 970 mm 5 400 kg *0.50 m 3 0.45 m 3 890 mm 1 010 mm 5 410 kg —RecommendationZX110M-30.59 m 3 0.50 m 3 950 mm 1 070 mm 5 430 kg — —*10.45 m 3 0.40 m 3 850 mm 970 mm 5 450 kg **20.50 m 3 0.45 m 3 890 mm 1 010 mm 5 500 kg — — — —V-type bucket: 0.35 m 3 (CECE heaped) 3 370 kgOne-point ripper 1 320 kg — — — —Center-pull type clamshell bucket: 0.30 m 3 (CECE heaped), Width 560 mm 6 690 kg — —Shell-push type clamshell bucket: 0.30 m 3 (CECE heaped), Width 685 mm 6 590 kg — —*With 700 mm shoes onlySuitable for materials with density of 2 000 kg/m 3 or less*1Reinforced bucket Suitable for materials with density of 1 600 kg/m 3 or less*2Level-pin-type reinforced bucket Suitable for materials with density of 1 100 kg/m 3 or less*3H-bucket Heavy-duty service— Not applicable2.81 marm1.96 marm2.26 marm2.81 marmTriplegrouser500 mm 11 900 kg 40 kPa (0.41 kgf/cm 2 )ZX110-3 with Off-Set Front:Equipped with off-set front, 1.95 m arm and 0.45 m 3(SAE, PCSA heaped) bucket.Shoe type Shoe width Operating weight Ground pressureTriplegrouser500 mm 11 500 kg 39 kPa (0.40 kgf/cm 2 )ZX110M-3 with Off-Set Front:Equipped with off-set front, 1.95 m arm and 0.45 m 3(SAE, PCSA heaped) bucket.Shoe type Shoe width Operating weight Ground pressureTriplegrouser700 mm 13 800 kg 29 kPa (0.30 kgf/cm 2 )Weights of the basic machines [including 1 850 kg counterweight andtriple grouser shoes, excluding front-end attachment, fuel,hydraulicoil,engine oil and coolant etc.] are :without BladeZX110-3 .....................ZX110M-3 ..................with BladeZX110-3 .....................8 400 kg with 500 mm shoes10 700 kg with 700 mm shoes9 500 kg with 500 mm shoes20 21

SPECIFICATIONSDIMENSIONSDIMENSIONS : OFF-SET FRONTUnit: mmKELD/D’ZX110-3 ZX110M-3A Distance between tumbles 2 620 2 990B Undercarriage length 3 340 3 790* C Counterweight clearance 890 1 100GNFMCKELD/D’D Rear-end swing radius 2 130D’ Rear-end length 2 130E Overall width of upperstructure 2 460F Overall height of cab 2 740 2 950IHJZX110-3ZX110M-3A Distance between tumblers 2 620 2 990B Undercarriage length 3 340 3 790* C Counterweight clearance 890 1 100D Rear-end swing radius 2 130 2 130ABUnit: mmIGHJNFMABC* G Min. ground clearance 440 595H Track gauge 1 990 1 990I Track shoe width G 500 G 700J Undercarriage width 2 490 2 690K Overall width 2 490 2 690L Overall length with 1.95 m arm 7 320M Overall height of boom with 1.95 m arm 3 050 3 140N Track height with triple grouser shoes 800* Excluding track shoe lug G: Triple grouser shoeD’ Rear-end length 2 130 2 130E Overall width of upperstructure 2 460 2 460F Overall height of cab 2 740 2 950WORKING RANGES : OFF-SET FRONT* G Min. ground clearance 440 595Unit: mmH Track gauge 1 990 1 990I Track shoe width G 500 G 700meterArm lengthZX110-3 / ZX110M-31.95 mJ Undercarriage width 2 490 2 690K Overall width 2 490 2 690Off-set distance0 m Max. (1 420 mm)ZX110-3 ZX110M-3 ZX110-3 ZX110M-3L Overall lengthWith 1.96 m arm 7 280 7 260With 2.26 m arm 7 280 7 260With 2.81 m arm 7 300 7 280A Max. digging reach 7 670 7 140A’ Max. digging reach (on ground) 7 530 7 480 7 000 6 950B Max. digging depth 5 340 5 140 4 800 4 600M Overall height of boomB’ Max. digging depth (8' level) 5 060 4 860 4 520 4 320With 1.96 m arm 2 740 2 950With 2.26 m arm 2 740 2 950With 2.81 m arm ** 2 740 ** 2 950C Max. cutting height 7 720 7 920 7 370 7 570D Max. dumping height 5 330 5 530 4 980 5 180N Track height with triple grouser shoes 800 800* Excluding track shoe lug ** The dimensions is shown in transportation of the arm. G: Triple grouser shoeGroundLineE Min. swing radius 2 950 2 520F Max. vertical wall 4 180 3 980 3 670 3 470WORKING RANGESG Left side off-set distance - 1 420Unit: mmH Right side off-set distance - 1 420meterZX110-3 / ZX110M-34.27 m boomBucket digging force ISOBucket digging force SAE : PCSA90 kN (9 200 kgf)78 kN (8 000 kgf)Arm length 1.96 m 2.26 m 2.81 mmeterArm crowd force ISO63 kN (6 400 kgf)A Max. digging reach 7 490 7 760 8 240A’ Max. digging reach (on ground) 7 350 / 7 300 7 620 / 7 580 8 110 / 8 070Arm crowd force SAE : PCSA61 kN (6 200 kgf)B Max. digging depth 4 780 / 4 580 5 080 / 4 880 5 630 / 5 430ZX110-3 with Blade (Optional)Excluding track shoe lugGroundLineB’ Max. digging depth (8' level) 4 520 / 4 320 4 850 / 4 650 5 430 / 5 220C Max. cutting height 7 940 / 8 140 8 110 / 8 320 8 360 / 8 560D Max. dumping height 5 530 / 5 730 5 700 / 5 910 5 960 / 6 170E Min. swing radius 2 370 2 400 2 660A Overall width of blade....................................................... 2 490 mmB Overall height of blade......................................................... 610 mmC Blade distance................................................................. 2 480 mmD Max. rasing height above ground........................................ 480 mmE Max. lowering depth from ground........................................ 500 mmF Max. vertical wall 3 800 / 3 600 4 110 / 3 910 4 560 / 4 350Bucket digging force ISO90 kN (9 100 kgf)BADECBucket digging force SAE : PCSA78 kN (7 970 kgf)meterArm crowd force ISO60 kN(6 090 kgf)55 kN(5 530 kgf)48 kN(4 890 kgf)Arm crowd force SAE : PCSA58 kN(5 860 kgf)53 kN(5 340 kgf)47 kN(4 750 kgf)Excluding track shoe lug22 23

LIFTING CAPACITIESEQUIPMENTMetric measureSTANDARD EQUIPMENTStandard equipment may vary by country, so please consult your Hitachi dealer for details.Notes: 1. Ratings are based on SAE J1097.2. Lifting capacity of the ZAXIS Series does not exceed 75 % of tipping load withthe machine on firm, level ground or 87 % full hydraulic capacity.3. The load point is a hook (not standard equipment) located on the back of the bucket.4. *Indicates load limited by hydraulic capacity.5. 0 m = Ground.ZX110-3 Off-Set Front Rating over-side or 360 degrees Rating over-front Unit: 1 000 kgLoad RadiusLoadConditionsPoint1.0 m 2.0 m 3.0 m 4.0 m 5.0 m 6.0 m 7.0 mAt max. reachHeightmeterArm 1.96 mBucketSAE, PCSA: 0.43 m 3Counterweight1 850 kgShoe 500 m6.0 m5.0 m *1.56 *1.56 *0.95 *0.95 6.584.0 m *1.65 *1.65 1.48 *1.79 *0.92 *0.92 7.053.0 m *2.18 *2.18 *1.95 *1.95 1.43 *1.89 0.91 *0.92 7.332.0 m 2.74 *3.00 1.89 *2.38 1.34 1.93 0.84 *0.94 7.431.0 m 2.44 3.56 1.72 2.50 1.25 1.83 0.82 *1.00 7.370 (Ground) 2.26 3.37 1.60 2.36 1.17 1.75 0.85 *1.08 7.15-1.0 m 2.20 3.30 1.53 2.29 1.13 1.71 0.95 *1.22 6.74-2.0 m *5.13 *5.13 3.67 *4.50 2.21 3.31 1.53 2.29 1.14 1.72 1.17 *1.45 6.10-3.0 m *4.99 *4.99 3.79 *5.65 2.28 3.40 1.59 2.36 1.67 *1.88 5.12-4.0 m 4.04 *4.70 2.48 *3.45CBAA: Load radiusB: Load point heightC: Lifting capacityENGINE- H/P mode control- E mode control- 50 A alternator- Dry-type air filter with evacuatorvalve (with air filter restrictionindicator)- Cartridge-type engine oil filter- Cartridge-type fuel double filters- Air cleaner double filters- Radiator, oil cooler and intercoolerwith dust protective net- Radiator reserve tank- Fan guard- Isolation-mounted engine- Auto idle system- Fuel cooler- Electrical fuel feed pump- Engine oil drain couplerHYDRAULIC SYSTEM- Work mode selector- Control valve with main relief valve- Extra port for control valve- Suction filter- Full-flow filter- Pilot filterCAB- CRES II (Center pillar reinforcedstructure) cab- OPG top guard fitted Level I(ISO10262) compliant cab- All-weather sound suppressed steelcab- Equipped with reinforced, tinted(green color) glass windows- Upper front window can be opened- 4 fluid-filled elastic mounts- Intermittent windshield wipers- Front window washer- Adjustable reclining seatwith adjustable armrests- Footrest- Electric double horn- AM-FM radio with digital clock- Auto control air conditioner- Retractable seat belt- Drink holder- Cigarette lighter- Ashtray- Storage box- Glove compartment- Floor mat- Short wrist control levers- Pilot control shut-off lever- Engine shut-off switchMONITOR SYSTEM- Display of meters: watertemperature, hour, fuel rate, clock- Other displays: work mode,auto-idle, glow, rearview monitor(when optional rear view camera isequipped), operating conditions,etc- Alarms: overheat, engine warning,engine oil pressure, alternator,minimum fuel level, hydraulic filterrestriction, air filter restriction, workmode, overload, etc- Alarm buzzers: overheat, engineoil pressure, overloadLIGHTS- 2 working lightsUPPER STRUCTURE- Undercover- 1 850 kg counterweight- Fuel level float- Hydraulic oil level gauge- Tool box- Rear view mirror (right & left side)- Swing parking brakeUNDERCARRIAGE- Travel parking brake- Travel motor covers- Hydraulic track adjuster- Bolt-on sprocket- Upper and lower rollers- Reinforced track links with pin seals- 4 tie down hooks- 500 mm triple grouser shoesFRONT ATTACHMENTS- HN bushing- WC (tungsten-carbide) thermalspraying- Reinforced resin thrust plate- Flanged pin- Centralized lubrication system- Dirt seal on all bucket pins- Casted bucket link A- Bucket clearance adjust mechanism- 2.26 m arm- 0.45 m 3 (SAE, PCSA heaped) bucketMISCELLANEOUS- Standard tool kit- Lockable machine covers- Lockable fuel refilling cap- Skid-resistant tapes, platesand handrails- Travel direction mark on track frame- Onboard information controller- Theft deterrent systemOPTIONAL EQUIPMENTOptional equipment may vary by country, so please consult your Hitachi dealer for details.CAB- Suspension seat- Transparent roof- Front glass lower guard- Front glass upper guard- OPG top guard, Level II- Air suspension seat with heater- Rain guard- Sun visor- 12 V power sourceLIGHTS- Additional work light (boom rightside)- Additional light (on the top of thecab)- Additional light (Rear light)- Rotating lampUNDERCARRIAGE- Track undercoverUPPER STRUCTURE- Rear view camera- Tropical cover- Travel motion alarm device- Electric fuel refilling pump with autostop- Swing motion alarm device withlampsATTACHMENTS- Attachment basic piping- Accessories for breaker- Accessories for breaker & crusher- Accessories for 2 speed selector- Additional pump- Assist piping- Pilot accumulator- Hose rupture valveOTHERS- Pre-cleaner- Biodegradable oil- Front screen of fuel cooler and aircondenser26 27

These specifications are subject to change without notice.Illustrations and photos show the standard models, and may or may not include optional equipment,accessories, and all standard equipment with some differences in colour and features.Before use, read and understand the Operator’s Manual for proper operation.Hitachi Construction Machinerywww.hitachi-c-m.comKS-EN08608.05 (KA/KA,GT3)Printed in Japan