Copyright© by <strong>Edimax</strong> Technology Co, LTD. all rights reserved. No part ofthis publication may be reproduced, transmitted, transcribed, stored in aretrieval system, or translated into any language or computer language, inany form or by any means, electronic, mechanical, magnetic, optical,chemical, manual or otherwise, without the prior written permission of thiscompanyThis company makes no representations or warranties, either expressed orimplied, with respect to the contents hereof and specifically disclaims anywarranties, merchantability or fitness for any particular purpose. Anysoftware described in this manual is sold or licensed "as is". Should theprograms prove defective following their purchase, the buyer (and not thiscompany, its distributor, or its dealer) assumes the entire cost of allnecessary servicing, repair, and any incidental or consequential damagesresulting from any defect in the software. Further, this company reservesthe right to revise this publication and to make changes from time to time inthe contents hereof without obligation to notify any person of such revisionor changes.All brand and product names mentioned in this manual are trademarksand/or registered trademarks of their respective holders.Linux Open Source CodeCertain <strong>Edimax</strong> products include software code developed by thirdparties, including software code subject to the GNU General PublicLicense ("GPL") or GNU Lesser General Public License ("LGPL").Please see the GNU (www.gnu.org) and LPGL (www.gnu.org) Websites to view the terms of each license.The GPL Code and LGPL Code used in <strong>Edimax</strong> products aredistributed without any warranty and are subject to the copyrights oftheir authors. For details, see the GPL Code and LGPL Codelicenses. You can download the firmware-files athttp://www.edimax.com.tw under "Download" page.2
Getting StartedEnglish Version.Instructions for using the router to share the Internet with multiplePCs. (Power on the Modem and the Router.)Cabling installation:1. Connect the Ethernet cable from the router’s WAN port to theLAN port of the modem.2. Connect another Ethernet cable from the any LAN ports (1~4)on router to the Ethernet socket on the PC.3. Check to make sure the router’s LINK LED is lit; to confirm thecable connections are made correctly.3