SkyView System Installation Guide - Dynon Avionics

SV-D700 / SV-D1000 Installation and ConfigurationMinimum Brightness Voltage–This is a voltage that represents the external controlsignal’s minimum voltage level. This must be set by the user.Minimum Brightness–This is an integer value ranging from 0 to 9 that represents thelowest backlight setting when the minimum brightness sensor voltage is present. Thismust be set by the user.Press BACK to save the settings and return to the LOCAL DISPLAY SETUP Menu or press EXIT toreturn to the Main Menu.Top Bar SetupThe top bar is the strip across the top of the screen. It displays textual information such as theclock, autopilot status, transponder, and COM radio status.Enter the Top Bar Setup Page to configure the top bar (SETUP MENU > LOCAL DISPLAY SETUP >TOP BAR SETUP).Aircraft InformationUse the Aircraft Information Page (SETUP MENU > SYSTEM SETUP > AIRCRAFT INFORMATION)to record important information about your aircraft.The tail number must be present for SkyView network configuration and operation.If you have more than one display in your SkyView system, the tail number onlyneeds to be set on the display that you initially perform the Network Configurationon. At network configuration time, all other displays that are set to the default tailnumber of DYNON will automatically have their settings and tail numbersynchronized with the display the configuration is performed from. Afterconfiguration, all displays’ tail numbers and settings will be synchronized, andfurther setup tasks can be performed from any display.Screen Layout SetupAs of SkyView software 5.0, you can use Screen Layout Setup page (SETUP MENU > SYSTEMSETUP > SCREEN LAYOUT SETUP) to customize and restrict the ways that the PFD Page, EnginePage, and Map Page are displayed on your SkyView display(s). This feature can be used in avariety of ways: You can prohibit and restrict the use of certain menu items in the SCREEN menu. Thiscan allow you to:o Enforce the relative layout of the PFD/Engine/Map pages on each display, for aconsistent cockpit environmento Restrict the ability to remove Pages from a display. This can be used, forexample, to force the PFD Page and the Engine Page always be displayed on adisplay or in the system.4-24 SkyView System Installation Guide - Revision O