SkyView System Installation Guide - Dynon Avionics

3. Basic SkyView Display OperationAfter reading this chapter, you should be familiar with basic SkyView display operationincluding how to use joysticks and buttons, how to turn displays on and off, how to access andnavigate menus, how to configure SkyView networks, and how to perform firmware updatesand other file operations.The SkyView SV-D700 and SV-D1000 displays are identical in functionality andpresentation. The only difference is in the size and resolution of the screen.Screen SynchronizationSkyView is designed to operate as an integrated system. SkyView configurations with more thanone networked display automatically share and synchronize settings on all displays. In-flightsettings such as baro and bugs are synchronized in real time as they are adjusted. Setup menuitems are synchronized when the user exits the setup menu and also at boot up. Aviation andobstacle databases are synchronized when they are loaded on any screen if Ethernet isconnected.It is not possible to have displays on the same network that do not share configurations,settings, and real time items. Even if a unit is off when settings are adjusted, they will besynchronized at boot.For displays to properly synchronize settings their tail numbers must be the sameand SkyView Network must be configured correctly. See the Network Setup andStatus Section of this manual for information about these required setup steps.Only one setup menu in the network may be open at once. If you try to open a setup menu on adisplay while it is open on another display, you will see OTHER SCREEN IN SETUP on the screenand not be allowed to open the setup menu. There is no "master" in the system; changes madeon any screen in the system will be automatically reflected on all other screens.Some things are purposefully not synchronized on displays: firmware, sensor configuration files(.sfg), and local display settings. You must ensure that each display is running the appropriatefirmware, up-to-date databases, and sensor configuration file. All of these files are available fordownload at downloads.dynonavionics.com. Also ensure that each display’s local settings areappropriately configured.SkyView System Installation Guide - Revision O 3-1