SkyView System Installation Guide - Dynon Avionics

System PlanningDynon Part NumberSV-NET-SERVOSV-NET-TESTSV-NET-HUBDescriptionSkyView Network Cabling Kit for Autopilot Servos(includes 20 feet of wires, connectors, connector shells, crimp contacts,insertion tool, heat shrink, and zip ties). One SV-NET-SERVO is used foreach servo in most installations.SkyView Network Test Cable–Not Aircraft-Grade(10 foot)SkyView Network Hub (5 SkyView Network connections)Table 6–SkyView System Connection HardwareExample SkyView SystemsSkyView systems are easily scalable and can accommodate a wide variety of componentsranging from a single display with one module to multiple displays with multiple modules. Thefollowing diagrams illustrate several example SkyView systems and the components needed tobuild them. Diagrams do not show a connection to aircraft power and do not imply aninstallation location. Additionally, cable lengths and models pictured below should not beblindly used as a “prescription”. Always consider your aircraft’s particular geometry and moduleinstallation locations before purchasing harnesses, hubs, and splitters.KEYDB9 FemaleSV-ADAHRS-200USBConnectorSV-D1000SV-NET-10CP(with installed D9)SV-HARNESS-D37Figure 5–SkyView System with One Display and One ADAHRSSV-D1000SV-EMS-220KEYDB9 MaleDB9 FemaleSV-ADAHRS-200SV-ADAHRS-201SV-NET-SPLSV-NET-10CP(with installed D9)USBConnectorSV-HARNESS-D37SV-NET-6CCGPSWireBundleSV-GPS-250SV-BAT-320Figure 6–SkyView System with One Display, One EMS, One GPS, One Backup Battery, and Two RedundantADAHRSSkyView System Installation Guide - Revision O 2-15