SkyView System Installation Guide - Dynon Avionics

System PlanningTest SkyView Network CableFigure 4 - SV-NET-HUB DimensionsSkyView displays are supplied with a test SkyView network cable that is intended for bench toptesting only. The test network cable is not built with aircraft-grade Tefzel® wiring and shouldnot be permanently installed in an aircraft.Ethernet ConnectionSkyView systems that have more than one display should have their Ethernet portspermanently connected together. Though not a required connection, it allows aviation andobstacle databases to be transferred to all displays in a SkyView system when they are loadedon any one of them. If Ethernet is not connected, aviation and obstacle databases will need tobe loaded on each display in the system individually.Future SkyView functionality may require Ethernet to be connected as describedin this section. Therefore, Dynon Avionics strongly recommends connecting allEthernet ports together at this time.SkyView System Installation Guide - Revision O 2-13