SkyView System Installation Guide - Dynon Avionics

Appendix C: Wiring and Electrical ConnectionsSurface Ground Speed 0,6Surface Ground Track 0,6Aircraft Identification 0,8Airborne Ground Velocity 0,9Geometric to Barometricaltitude difference0,9Geometric Vertical Rate 0,9Squawk Code 6,1Emergency Status 6,1Quality Indicator (NACp) 6,5Quality Indicator (NACv) 6,5Quality Indicator (SIL) 6,5Version Indicator 6,5Surface Length/Width 6,5Surface Antenna Offset 6,5Table 72 - SV-XPNDR-26X ADS-B Parameters SupportedIn all cases, uncompensated latency due to the transponder is less than 10 milliseconds.Analysis of the system latency should add this to the latency of the GPS system and thetransmission time of the position data from the GPS to the transponder to determine theoverall latency.FAA 91.227 ComplianceThe SV-XPNDR-26X transponder can be connected to the following GPS units to form the basisof a 14 CFR 91.227 compliant ADS-B installation:Freeflight 1201 & 1204 WAAS/GPS SensorsNexNav MINI & NexNav MAX WAAS/GPS SensorsFor installations seeking certification to 91.227 or other applicable standards, additionalcompliance information may be available on request from Dynon Avionics or Trig AvionicsLimited.AMC 20-24 ComplianceThe TT21 or TT22 transponder can be connected to the following GPS units to form the basis ofan AMC20-24 compliant ADS-B installation:Freeflight 1201 & 1204 WAAS/GPS Sensors19-18 SkyView System Installation Guide - Revision O