SkyView System Installation Guide - Dynon Avionics

System PlanningServos (SV32, SV42, and SV52)Observe the following guidelines when choosing a location for servos:The location must allow the servo arm and associated linkage to move freely throughthe entire range of travel.Do not allow the servo arm to travel more than ±60° from neutral throughout thecontrol system’s range of travel. Note that this requirement only applies to arm servosand not capstan servos.Leave room for all mounting hardware, including brackets, fasteners, linkages, etc.Leave room for electrical connections.SV-ARINC-429Observe the following guidelines when choosing a location for the SV-ARINC-429 module:Avoid locations that are subject to severe vibration.Avoid locations that are subject to extreme humidity.Leave ample working room for electrical connections.SkyView systems support one or two SV-ARINC-429 per network.A common location for the SV-ARINC-429 is behind the instrument panel, keeping itclose to the display and associated ARINC-429 capable device.SV-ADSB-470The SV-ADSB-470 is designed to be mounted in any convenient location in the cockpit, thecabin, or an avionics bay.The following guidelines should be followed, remembering to allow adequate space forinstallation of cables and connectors. Select a position in the aircraft that is not too close to any high external heat source.(The SV-ADSB-470 is not a significant heat source itself and does not need to be keptaway from other devices for this reason). Avoid sharp bends and placing the cables too near to the aircraft control cables. Avoid locations that are subject to severe vibration. Avoid locations that are subject to extreme humidity. Leave ample working room for electrical connections.Mounting RequirementsSome SkyView modules include mounting fasteners, while some do not. Mounting fasteners areincluded as a convenience and installers are not required to use them. Use sensible mountingtechniques when installing equipment in suitable locations. You should reference individualequipment chapters for information regarding installation instructions.2-10 SkyView System Installation Guide - Revision O