SkyView System Installation Guide - Dynon Avionics

Appendix C: Wiring and Electrical ConnectionsSV-EMS-220 Male EMS 37-pin Harness WireD37 PinColorDescription15 Red +12 volts DC Auxiliary Power Output16 Black Signal Ground17 Black Signal Ground18 White/Red+5 volts DC Auxiliary Power Output(Fuse limited to 500 mA)19 White/Black Fuel Flow Input 220 Orange/Brown General Purpose Input 921 Orange/Blue General Purpose Input 1022 Purple/Yellow Enhanced General Purpose Input 223 Purple/Green Enhanced General Purpose Input 324 Orange/Green Amps+ Input25 Orange/Purple Amps- Input26 Green/Red Manifold Pressure Input27 Open General Purpose TC Input 1+28 Open General Purpose TC Input 1-29 Yellow/Green Optional External Alarm Light30 Black Signal Ground31 White/Orange Enhanced General Purpose Input 1332 White/Green Standard RPM Left Input33 White/Blue Standard RPM Right Input34 Blue Low Voltage RPM Left Input35 Green Low Voltage RPM Right Input36 Blue General Purpose TC Input 2+37 Green General Purpose TC Input 2-Table 65–SV-EMS-220 Male D37 Transducer ConnectorSV-EMS-221 D37PinEMS 37-pin Harness WireColorSensor (with Dynon part number ifapplicable)1 Red Battery voltage (voltmeter input)2 Yellow or Unwired Not connected3 Black Available ground4 Purple/Blue Not connected5 Black Available ground6 White/Yellow Not connected7 White/Brown Not connected8 Brown Fuel pressure (101716-000)9 Brown/Blue Not connected10 Brown/Yellow Not connected11 Orange Not connected19-10 SkyView System Installation Guide - Revision O