SkyView System Installation Guide - Dynon Avionics

SV-COM-C25 Installation, Configuration, and Testingpushed?4. (Optional, if two SV-COM-C25s installed) Does the PTT Select Switch cause onlythe selected radio to transmit when PTT switch is pushed?5. Temporarily install a VSWR meter between the SV-COM-425 and the antenna.Using brief test transmissions, is the VSWR 3:1 or below? The maximumacceptable VSWR for SV-COM-C25 is 3:1.6. When transmitting on SV-COM-C25, is there any interference to other aircraftsystems?7. Power off the SkyView display(s) by pushing and holding Button #1 on thedisplay. The SV-COM-C25 should continue to operate normally, with theexception that auto-population of frequencies will not occur, and a NO SV errormessage will appear approx. 3 seconds after SV is not operating.In Flight1. Does the SV-COM-C25 receive other aircraft and ground transmissions atreasonable ranges?2. Is received audio clear at most volume levels on the SV-COM-C25? (Distortion athigh volume levels is normal.)3. Are transmissions from the SV-COM-C25 heard by others at reasonable ranges?(Keep in mind that the power output of the SV-COM-C25 is 6 watts.)4. Are transmissions from the SV-COM-C25 clear (when received by others)?16-16 SkyView System Installation Guide - Revision O