SkyView System Installation Guide - Dynon Avionics

13. Vertical Power VP-X Integration and ConfigurationDynon SkyView can interface with the Vertical Power VP-X System to provide robust monitoringand control of your electrical system via your SkyView system. In order to use this feature, aVertical Power VP-X system is required, along with a software license for the VP-X featureswithin SkyView.License InformationThe VP-X software features are enabled on Dynon SkyView by purchasing a VP-X license codefrom Dynon Avionics and entering it into your SkyView system. Only one VP-X license is neededin a SkyView system, no matter how many displays are attached. That license is applied to onlyone display, but that display stores the license information for the entire system. In normal use,license information is shared with all displays connected via SkyView Network to allow the VP-Xfeatures to be operated on any display in the system.Checking License StatusTo check whether a SkyView system is licensed to use the VP-X software features, go to SETUPMENU > LOCAL DISPLAY SETUP > LICENSE, and look at the status of the Vertical Power line.Possible license statuses include:LICENSED (THIS DISPLAY): The SkyView system is licensed to enable the use of theVertical Power software features. This display stores the license information and alsoallows other displays in the aircraft to access the Vertical Power features.LICENSED - CONNECTED DISPLAY ONLINE: The SkyView system is licensed to use theVertical Power software features. This display is currently connected to a licenseddisplay.LICENSED DISPLAY OFFLINE - XX HOURS REMAIN The SkyView system is licensed to usethe Vertical Power software features. However, the display that actually stores thelicense information is not currently connected. When this happens, the Vertical Powersoftware features will continue to be accessible for 30 flight hours beyond when it lastsaw the licensed display in the aircraft. Once the licensed display is seen again, thistimer is cleared.NO LICENSE: No display in the SkyView system is licensed to use the Vertical Powerfeatures.Purchasing and Installing a VP-X LicenseA license can be purchased and applied to your system in one of two ways:3. Call Dynon Avionics directly at 425-402-0433 with your SkyView display model (SV-D100or SV-D700) and serial number (as displayed on the case sticker, or in SETUP MENU >LOCAL DISPLAY SETUP > DISPLAY HARDWARE INFORMATION). A VP-X License Code canbe purchased for the entire aircraft you wish to enable the VP-X software features on.This six character License Code is then entered in SETUP MENU > LOCAL DISPLAY SETUPSkyView System Installation Guide - Revision O 13-1