SkyView System Installation Guide - Dynon Avionics

2. System PlanningInstallers should read and understand this chapter before proceeding withphysical installation. SkyView equipment installed contrary to the requirementsoutlined in this chapter may not operate within specifications.The purpose of this chapter is to familiarize you with important SkyView system informationand concepts including the following:Operating specificationsInstallation location requirementsSkyView systemsSkyView modules have environmental and location requirements that must be adhered to forspecified operation. This chapter helps installers make informed decisions regarding suitableSkyView equipment locations in aircraft. It contains electrical, mechanical and environmentalspecifications, installation requirements, and other important guidelines and suggestions.When SkyView components are used together, they are referred to as a SkyView system. Thischapter also explains what a SkyView system is and how to build one.Power ConsumptionTable 2 contains power specifications for typical SkyView systems. The table below accounts forthe power that a SkyView display consumes while powering itself and its attached modules. Itdoes not account for SkyView autopilot servo power because they are powered directly fromaircraft master power.Power SpecificationsSkyView system no backupbattery (per display)SkyView system with backupbattery (per display)Approximate currentconsumption at 12 volts DCApproximate currentconsumption at 24 volts DC3.5 amps 1.8 amps+1.5 amps additionalduring battery charging+0.7 amps additionalduring battery chargingSV-XPNDR-26X 0.4 amps average 0.2 amps averageSV-ADSB-470 0.2 amps average 0.1 amps averageSV-COM-C25 3.0 amps average 1.5 amps averageTable 2–SkyView System Power SpecificationsTable 3 contains servo power specifications when servos are engaged and moving at 100%torque.Power SpecificationsApproximate currentApproximate currentconsumption at 12 volts DC consumption at 24 volts DCSV32 1.3 amps 0.7 ampsSV42 2.0 amps 1.0 ampSkyView System Installation Guide - Revision O 2-1