SkyView System Installation Guide - Dynon Avionics

Control Wheel Steering ModeAutopilot Servo Installation, Configuration, and CalibrationControl Wheel Steering may be set to YES or NO. Setting HOLD TO ENGAGE to YES allows you totake temporary manually control of the aircraft to redirect its targets while pressing andholding the Disengage/CWS Button when the autopilot is engaged. See the SkyView Pilot’s UserGuide for details on Control Wheel Steering behavior. To set the control wheel steering mode:1. Go to the Control Wheel Steering Mode Adjust Page (SETUP MENU > AUTOPILOT SETUP> DISENGAGE BUTTON > CONTROL WHEEL STEERING MODE).2. Set to YES or NO.3. Press ACCEPT to save or press CANCEL to return to the Disengage Button Menu.Autopilot In-Flight Tuning ProceduresThis completes the on-ground portion of Autopilot setup.Next, please use the SkyView Autopilot In-Flight Tuning Guide to maximize the dynamic flyingperformance of the Autopilot as installed in your aircraft.The latest version of the SkyView Autopilot In-Flight Turning Guide can be downloaded fromhttp://docs.dynonavionics.com.SkyView System Installation Guide - Revision O 10-21