SkyView System Installation Guide - Dynon Avionics

9. SV-BAT-320 InstallationThis chapter contains information that specifically applies to the installation of the SV-BAT-320Backup Battery. After reading this chapter, you should be able to determine how to prepare theinstallation location, mount the module, connect it to a display, monitor its voltage, and makesure it is charged.SkyView displays are designed to work with the SV-BAT-320 Backup Battery. Usingany other different battery will void any warranties and is a significant safetyhazard. Do not extend the SV-BAT-320’s battery wiring.Figure 54 is a high-level overview of a suggested SV-BAT-320 installation, configuration, andmaintenance procedure.Choose alocation based onLocationRequirementsSectionPrepare thelocationInstall batteryConnect battery tothe display wiringharnessCharge battery*Confirm batterychargedPerform yearlybattery checkPass?No*Assumes SV-D700 or SV-D1000 is properly installed and working.Figure 54–Suggested SV-BAT-320 Installation, Configuration, and Maintenance ProcedureYesSkyView System Installation Guide - Revision O 9-1