SkyView System Installation Guide - Dynon Avionics

SV-EMS-220/221 Installation and ConfigurationExample Rotax 912 (carbureted) (SV-EMS-220)PinEMS 37-pin Harness Sensor (with Dynon part number ifWire Colorapplicable)1 Red Battery voltage (voltmeter input)2 Yellow or Unwired Not connected3 Black Ground4 Purple/Blue Rotax CHT or oil (801-10-1)5 Black Ground6 White/YellowRotax oil pressure (Honeywell or Rotax P/N456180)7 White/Brown Rotax CHT or oil (801-10-1)8 Brown Fuel pressure (100411-000 or 101690-000)9 Brown/Blue Heated pitot status (contact input)10 Brown/Yellow Not connected11 Orange Not connected12 Yellow Flaps position potentiometer13 Black Ground14 Yellow Fuel flow (100403-003)15 RedFuel flow power (100403-003) / Oil pressure(Honeywell and Rotax P/N 456180 only)sensor power16 Black Ground17 Black Ground18 White/RedManifold Pressure Sensor Power (+5 volt) /Kavlico Pressure Sensors19 White/Black Not connected20 Orange/Brown Fuel level left (resistive)21 Orange/Blue Fuel level right (resistive)22 Purple/Yellow Rotax CHT or oil (801-10-1)23 Purple/Green Elevator position potentiometer24 Orange/Green Ammeter shunt + (100412-000)25 Orange/Purple Ammeter shunt -26 Green/Red Manifold Pressure (100434-000)27 Open Not connected28 Open Not connected29 Yellow/Green Optional External Alarm Light30 Black Not connected31 White/Orange Not connected32 White/Green RPM33 White/Blue Not Connected34 Blue Not connected35 Green Not connectedSkyView System Installation Guide - Revision O 7-23