SkyView System Installation Guide - Dynon Avionics

SV-EMS-220/221 Installation and ConfigurationLycoming/Continental 6-cylinder Carbureted (SV-EMS-220)PinEMS 37-pin Harness Sensor (with Dynon part number ifWire Colorapplicable)1 Red Battery voltage (voltmeter input)2 Yellow or Unwired Not connected3 Black Ground4 Purple/Blue Elevator position potentiometer5 Black Ground6 White/Yellow Oil pressure (100411-002 or 101693-000)7 White/Brown Oil temperature (100409-000)8 Brown Fuel pressure (100411-000 or 101690-000)9 Brown/Blue Heated pitot status (contact input)10 Brown/Yellow Not connected11 Orange Not connected12 Yellow Not connected13 Black Ground14 Yellow Fuel flow (100403-003)15 Red Fuel flow power (100403-003)16 Black Ground17 Black Ground18 White/RedManifold Pressure Sensor Power (+5 volt) /Kavlico Pressure Sensors19 White/Black Not connected20 Orange/Brown Fuel level left (resistive)21 Orange/Blue Fuel level right (resistive)22 Purple/Yellow Flaps position potentiometer23 Purple/Green Carburetor temperature (100468-000)24 Orange/Green Ammeter shunt + (100412-000)25 Orange/Purple Ammeter shunt -26 Green/Red Manifold Pressure (100434-000)27 Open Not connected28 Open Not connected29 Yellow/Green Optional External Alarm Light30 Black Not connected31 White/Orange Not connected32 White/Green RPM Left (standard)33 White/Blue RPM Right (standard)34 Blue Not connected35 Green Not connected36 Blue or Unwired Not connected37 Green or Unwired Not connectedTable 22–Example Lycoming/Continental 6-cylinder Carbureted 37-pin Connector Sensor MapSkyView System Installation Guide - Revision O 7-15