Quick Start for Network Agent 5-Step Quick Start See - Websense ...

More documents

Recommendations

Info

Quick Start for Network AgentFiltering Service Connections Status(Planning worksheet 1) For each Filtering Service, connect at least one Network Agent machine.Typically, Network Agent is installed on the Filtering Service machine, so the IP address is the samefor both.Global Settings(Planning worksheet 2) Global Settings determine the functions performed by all Network Agents. Ifyour network includes multiple Network Agent machines, these settings apply to all.NOTETo monitor or filter file attachments exchanged internally via peer-topeermessaging, tell Network Agent to monitor the internal machinesinvolved.Quick Start 10 Network Agent
Quick Start for Network AgentInternal Network Definition: Identify the machines in your network.To add machines other than network segments recognized by default, click Add.Internal Traffic Monitoring: Network Agent monitors requests sent to and from the internal IPaddresses you specify. To identify a machine, click Add, then enter its IP address.Additional Settings:• Bandwidth calculation interval (in seconds): A lower value (more frequent interval)ensures higher accuracy but also increases overall network traffic.• Log requests and traffic volume by protocol: Do you want Network Agent to log requestsand volume by protocol? Uncheck this box to prevent Network Agent from logging protocolrequests periodically.• If you enable protocol logging, either accept the default logging interval (1 minute) or specifya different interval (at least 1 minute).When protocol logging is selected, Network Agent provides to Log Server both the numberof requests by protocol and the traffic volume for each protocol.Local Settings(Planning worksheet 3) These settings determine the functions performed by each Network Agentmachine. By default, Network Agent monitors traffic to and from external sites for all internalmachines it sees. Machine names are tracked in log data and Real-Time Analyzer output.Configure how much of the internal network each Network Agent machine sees. Then, specify anyexceptions to the default monitoring behavior. Configure one Network Agent per screen.Quick Start 11 Network Agent
Page 1 and 2: Quick Start for Network AgentWhat i
Page 3 and 4: Network Agent’s special roleQuick
Page 5 and 6: Quick Start for Network AgentWorksh
Page 7 and 8: Quick Start for Network AgentWorksh
Page 9: Quick Start for Network AgentHubsIf
Page 13 and 14: Quick Start for Network AgentNetwor
Page 15 and 16: Quick Start for Network AgentFieldN
Page 17 and 18: Quick Start for Network AgentSpanni
Page 19 and 20: Quick Start for Network AgentSwitch
Page 21 and 22: Quick Start for Network AgentThe fo
Page 23: Gateway ConfigurationQuick Start fo

Quick Start for Network Agent 5-Step Quick Start See - Websense ...

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?