Mass flow meters - OPTIMASS 1000 - Forbes Marshall
Mass flow meters - OPTIMASS 1000 - Forbes Marshall Mass flow meters - OPTIMASS 1000 - Forbes Marshall
2 TECHNICAL DATAOPTIMASS 10002.1 Technical data• The following data is provided for general applications. If you require data that is morerelevant to your specific application, please contact us or your local representative.• Additional information (certificates, special tools, software,...) and complete productdocumentation can be downloaded free of charge from the website (Download Center).Measuring systemMeasuring principleApplication rangeMeasured valuesCalculated valuesCoriolis mass flowMass flow and density measurement of fluids, gases and solidsMass, density, temperatureVolume, referred density, concentration, velocityDesignBasicFeaturesVariantsCompact versionRemote versionModbus versionSystem consists of a measuring sensor and a converter to process theoutput signalFully welded maintenance free sensor with twin straight measuring tubesIntegral converterAvailable with field, wall or 19" rack mount versions of the converterSensor with integral electronics providing Modbus output for connection to aPLCMeasuring accuracyMassLiquid±0.15% of actual measured flow rate + zero stabilityGas±0.5% of actual measured flow rate + zero stabilityRepeatabilityBetter than 0.05% plus zero stability (includes the combined effects ofrepeatability, linearity and hysteresis)Zero stabilityStainless Steel±0.01% of maximum flow rate with respective sensor sizeReference conditionsProductWaterTemperature 20°C / 68°FOperating pressure1 barg / 14.5 psigEffect on sensor zero point caused by a shift in process temperatureStainless Steel 0.001% per 1°C / 0.00055% per 1°FEffect on sensor zero point caused by a shift in process pressureStainless Steel0.00012% of the max flow rate per 1 bar rel . / 0.0000083% of the max flow rateper 1 psigDensityMeasuring range 400...2500 kg/m 3 / 25...155 lbs/ft 3Accuracy ±2 kg/m 3 / ±0.13 lbs/ft 3 (S15: ±5 kg/m 3 / ±0.33 lbs/ft 3 )On site calibration ±0.5 kg/m 3 / ±0.033 lbs/ft 38www.krohne.com03/2011 - 4000040304 - TD OPTIMASS 1000 R05 en
OPTIMASS 1000TECHNICAL DATA 2TemperatureAccuracy±1°C / 1.8°FOperating conditionsMaximum flow ratesS15S25S40S50Ambient temperatureCompact version with AluminiumconverterCompact version with Stainless SteelconverterRemote versionsProcess temperatureFlanged connectionHygienic connectionNominal pressure at 20°C / 68°FMeasuring tubeStainless SteelOuter cylinder6500 kg/h / 240 lbs/min27000 kg/h / 990 lbs/min80000 kg/h / 2935 lbs/min170000 kg/h / 6235 lbs/min-40...+60°C / -40…+140°FExtended temperature range: +65°C / +149°F for some I/O options. For moreinformation contact manufacturer.-40...+55°C / -40…+130°F-40...+65°C / -40…+149°F-40…+130°C / -40…+266°F-40…+130°C / -40…+266°F-1…100 barg / -14.5…1450 psigNon PED / CRN approved Typical burst pressure > 100 barg / 1450 psig at 20°CPED / CRN approved secondary-1…63 barg / -14.5…910 psigcontainmentPED approved secondary containment -1…100 barg / -14.5…1450 psigFluid propertiesPermissible physical conditionLiquids, gases, slurriesPermissible gas content (volume) Contact manufacturer for informationPermissible solid content (volume) Contact manufacturer for informationProtection category (acc. to EN 60529) IP 67, NEMA 4XInstallation conditionsInlet runsOutlet runsNone requiredNone requiredMaterialsMeasuring tube Stainless Steel UNS S31803 (1.4462)SpigotStainless Steel 316 / 316L (CF3M / 1.4409) dual certifiedFlangesStainless Steel 316 / 316L (1.4401 / 1.4404) dual certifiedOuter cylinderStainless Steel 304 / 304L (1.4301 / 1.4307) dual certifiedOptional Stainless Steel 316 / 316L (1.4401 / 1.4404) dual certifiedHeating jacket versionHeating jacket Stainless Steel 316L (1.4404)The outer cylinder is in contact with the heating medium03/2011 - 4000040304 - TD OPTIMASS 1000 R05 enwww.krohne.com9
- Page 3: OPTIMASS 1000PRODUCT FEATURES 11.1
- Page 11 and 12: OPTIMASS 1000TECHNICAL DATA 2ATEX (
- Page 13 and 14: OPTIMASS 1000TECHNICAL DATA 2OPTIMA
- Page 15 and 16: OPTIMASS 1000TECHNICAL DATA 22.3 Gu
- Page 17: OPTIMASS 1000TECHNICAL DATA 22.4 Di
- Page 20 and 21: 2 TECHNICAL DATAOPTIMASS 1000PN63DN
- Page 22 and 23: 2 TECHNICAL DATAOPTIMASS 1000Dimens
- Page 24 and 25: 2 TECHNICAL DATAOPTIMASS 1000Dimens
- Page 26 and 27: 2 TECHNICAL DATAOPTIMASS 10002.4.4
- Page 28 and 29: 3 INSTALLATIONOPTIMASS 1000Mounting
- Page 30 and 31: 3 INSTALLATIONOPTIMASS 10003.2.3 Ma
- Page 32: KKKKROHNE product overview© KROHNE
<strong>OPTIMASS</strong> <strong>1000</strong>TECHNICAL DATA 2TemperatureAccuracy±1°C / 1.8°FOperating conditionsMaximum <strong>flow</strong> ratesS15S25S40S50Ambient temperatureCompact version with AluminiumconverterCompact version with Stainless SteelconverterRemote versionsProcess temperatureFlanged connectionHygienic connectionNominal pressure at 20°C / 68°FMeasuring tubeStainless SteelOuter cylinder6500 kg/h / 240 lbs/min27000 kg/h / 990 lbs/min80000 kg/h / 2935 lbs/min170000 kg/h / 6235 lbs/min-40...+60°C / -40…+140°FExtended temperature range: +65°C / +149°F for some I/O options. For moreinformation contact manufacturer.-40...+55°C / -40…+130°F-40...+65°C / -40…+149°F-40…+130°C / -40…+266°F-40…+130°C / -40…+266°F-1…100 barg / -14.5…1450 psigNon PED / CRN approved Typical burst pressure > 100 barg / 1450 psig at 20°CPED / CRN approved secondary-1…63 barg / -14.5…910 psigcontainmentPED approved secondary containment -1…100 barg / -14.5…1450 psigFluid propertiesPermissible physical conditionLiquids, gases, slurriesPermissible gas content (volume) Contact manufacturer for informationPermissible solid content (volume) Contact manufacturer for informationProtection category (acc. to EN 60529) IP 67, NEMA 4XInstallation conditionsInlet runsOutlet runsNone requiredNone requiredMaterialsMeasuring tube Stainless Steel UNS S31803 (1.4462)SpigotStainless Steel 316 / 316L (CF3M / 1.4409) dual certifiedFlangesStainless Steel 316 / 316L (1.4401 / 1.4404) dual certifiedOuter cylinderStainless Steel 304 / 304L (1.4301 / 1.4307) dual certifiedOptional Stainless Steel 316 / 316L (1.4401 / 1.4404) dual certifiedHeating jacket versionHeating jacket Stainless Steel 316L (1.4404)The outer cylinder is in contact with the heating medium03/2011 - 4000040304 - TD <strong>OPTIMASS</strong> <strong>1000</strong> R05 enwww.krohne.com9