MetaXpress PowerCore Installation and User Guide - Support Home ...

MetaXpress PowerCore Installation and Configuration NotesTable A-6 MetaXpress PowerCore Server Preferences (cont’d)Item Description SettingsPercentage ofWork Unit FailuresAllowed per JobTask CompletionTimeout (s)Log File LocationThe percentage of work units thatcan fail before an analysis job ismarked as having failed.For example, if the percentage isset to 10, and a job has 100 workunits, the MetaXpress PowerCoreSoftware continues to process thejob even if 9 work units fail. If 10work units fail, however,processing stops, and the job ismarked as having failed.Tip! To enable the MetaXpressPowerCore Software toprocess jobs completely, usea high percentage of workunit failures, such as 75% to99%. The higher thepercentage, the greater thechance that the MetaXpressPowerCore Software cancomplete the job.The amount of time, in seconds,the client computer can take toprocess a work unit. TheMetaXpress PowerCore servermarks work units as failed ifresults are not returned withinthis time frame. Work units aretypically processed in 60 to 360seconds, but processing can takelonger depending on complexity.The location of MetaXpressPowerCore log files. TheMetaXpress PowerCore serverrecords processing details in a logfile at this location whenprocessing jobs.The default location of the log fileis the MetaXpress PowerCoreapplication folder. To change thelocation, click the ellipsis (...).Whenever you restart theMetaXpress PowerCore serverapplication, the software starts anew log file.90 0112-0183 C