MetaXpress PowerCore Installation and User Guide - Support Home ...

More documents

Recommendations

Info

MetaXpress PowerCore Installation and Configuration NotesMetaXpress PowerCore Server SettingsUse Table A-4 and Table A-5 to record MetaXpress PowerCore serversettings. To access these settings, click Edit > Server Settings in theMetaXpress PowerCore server application.Table A-4 MetaXpress PowerCore Server Connection SettingsItem Description SettingsClient PortClient ResponseTimeout (s)Use UDPBroadcast to FindClientsBroadcast toExternal InterfaceThe port number used forcommunication between theMetaXpress PowerCore server andMetaXpress PowerCore clients. AMetaXpress PowerCore server andits clients must use the same portnumber, and the port cannot be inuse by other applications.Firewalls and antivirus softwaremust be configured to permit UDPand TCP communication amongcomputers on the assigned port.The default port is 20000. Forinformation on assigning portnumbers, seehttp://www.iana.org/assignments/port-numbers.The amount of time, in seconds,allowed for clients to respond toMetaXpress PowerCore serverrequests. The MetaXpressPowerCore server disconnectsfrom clients if it does not receive aresponse from them within thistime frame.Enables the MetaXpressPowerCore server to use theprotocol UDP to find clientsinstalled and running on thenetwork. If UDP is not enabled,the only way for the server to findexternal clients is if they are onthe selected clients list, and theserver broadcasts to them directlyusing TCP.Enables the MetaXpressPowerCore server to broadcastthrough a network card to findany local MetaXpress PowerCoreclient that is running on theinternal network.86 0112-0183 C
MetaXpress PowerCore Software Installation and User GuideTable A-4 MetaXpress PowerCore Server Connection Settings (cont’d)Item Description SettingsBroadcast toLocalhostBroadcast to SelfBroadcast Interval(s)Broadcast toSelected ClientsEnables the MetaXpressPowerCore server to broadcastthrough the localhost port to findany client that is running on theserver itself. These clients mustbe configured to use the server’slocalhost port number in the PortNumber setting.Enables the MetaXpressPowerCore server to broadcast toits computer name to find anyclient that is running on the serveritself.The amount of time, in seconds,that elapses between broadcasts.Used to broadcast to knownMetaXpress PowerCore clientcomputers through TCP. On busynetworks, this can be moreefficient than using UDP broadcastalone.If the server does not use the UDPbroadcast option, it must use theBroadcast to Selected Clients optionto find clients running on networkcomputers.0112-0183 C 87
Page 1 and 2:
MetaXpress ® PowerCore High Conten
Page 3 and 4:
ContentsChapter 1 Overview and Requ
Page 5 and 6:
MetaXpress PowerCore Software Insta
Page 7 and 8:
Overview and Requirements1Introduct
Page 9 and 10:
Page 11 and 12:
MetaXpress PowerCore ServerInstalla
Page 13 and 14:
Page 15 and 16:
Page 17 and 18:
Page 19 and 20:
MDCStore Database and File ServerUp
Page 21 and 22:
Page 23 and 24:
Page 25 and 26:
Database Client Configuration4Intro
Page 27 and 28:
Page 29 and 30:
Page 31 and 32:
Page 33 and 34:
Page 35 and 36: MetaXpress PowerCore Software Insta
Page 45 and 46: MetaXpress PowerCore ClientInstalla
Page 51 and 52: MetaXpress PowerCore Analysis-JobMa
Page 59 and 60: MetaXpress PowerCore Server andLice
Page 65 and 66: MetaXpress PowerCoreClient Manageme
Page 69 and 70: Troubleshooting9IntroductionThis se
Page 81 and 82: MetaXpress PowerCore Installationan
Page 85: MetaXpress PowerCore Software Insta
Page 95 and 96: GlossaryAcuityXpress Software: Soft
Page 99 and 100: IndexAactive processes 65, 88Acuity
show all

MetaXpress PowerCore Installation and User Guide - Support Home ...

Create successful ePaper yourself

Delete template?

Save as template?