MetaXpress PowerCore Installation and User Guide - Support Home ...

MetaXpress PowerCore Installation and Configuration NotesMetaXpress PowerCore Server SettingsUse Table A-4 and Table A-5 to record MetaXpress PowerCore serversettings. To access these settings, click Edit > Server Settings in theMetaXpress PowerCore server application.Table A-4 MetaXpress PowerCore Server Connection SettingsItem Description SettingsClient PortClient ResponseTimeout (s)Use UDPBroadcast to FindClientsBroadcast toExternal InterfaceThe port number used forcommunication between theMetaXpress PowerCore server andMetaXpress PowerCore clients. AMetaXpress PowerCore server andits clients must use the same portnumber, and the port cannot be inuse by other applications.Firewalls and antivirus softwaremust be configured to permit UDPand TCP communication amongcomputers on the assigned port.The default port is 20000. Forinformation on assigning portnumbers, seehttp://www.iana.org/assignments/port-numbers.The amount of time, in seconds,allowed for clients to respond toMetaXpress PowerCore serverrequests. The MetaXpressPowerCore server disconnectsfrom clients if it does not receive aresponse from them within thistime frame.Enables the MetaXpressPowerCore server to use theprotocol UDP to find clientsinstalled and running on thenetwork. If UDP is not enabled,the only way for the server to findexternal clients is if they are onthe selected clients list, and theserver broadcasts to them directlyusing TCP.Enables the MetaXpressPowerCore server to broadcastthrough a network card to findany local MetaXpress PowerCoreclient that is running on theinternal network.86 0112-0183 C