MetaXpress PowerCore Installation and User Guide - Support Home ...

MetaXpress PowerCore Software Installation and User GuideUpdating the MDC File Server ApplicationIf you are using the MDC File Server application, you must use version1.1.0.22 or later. If you have an older version of the application, youmust update it as described in this section.To update the MDC File Server application1. Log in to the server where the MDC File Server is installed asadministrator.2. If your MetaXpress PowerCore Software installation is on a CD,insert the CD into the computer’s CD-ROM drive. If theinstallation screen does not appear, go to the CD folder anddouble-click Autorun.exe.3. If you downloaded the MetaXpress PowerCore Softwareinstallation package, copy it to the server, double-click the selfextractorfile to unzip it, and then double-click Autorun.exe.4. On the MetaXpress PowerCore Software installation screen, clickInstall or Update File Server.5. Follow the onscreen instructions to complete the installation.When the update is complete, a message appears stating thatthe application has been updated successfully.The MDC File Server installer installs two files:• The File Server Manager program (FileServerManager.exe) isinstalled in the following location:C:\Program Files\Molecular Devices\MDC File Server• The file server (FileServer.exe) is installed in the followinglocation:C:\Windows\System32Configuring Database ClientsWhen you have completed the updates, configure the Oracle or SQLdatabase clients on MetaXpress PowerCore servers and MetaXpressPowerCore clients as described in Chapter 4 Database ClientConfiguration on page 25.0112-0183 C 23