Modular electrical linear drives OSP-E - parker-origa.com
Modular electrical linear drives OSP-E - parker-origa.com
Modular electrical linear drives OSP-E - parker-origa.com
- No tags were found...
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>Modular</strong> <strong>electrical</strong> <strong>linear</strong> <strong>drives</strong> <strong>OSP</strong>-E9.5.2 Sequence of assembly:Pay attention to tightening torque.• Fit the motor to the flange plate.• Fit the <strong>linear</strong> drive to the flange plate ensuring that the axles centres are set at the correct distanceappart. (See table)• Push on belt wheels and feed on timing belt. (See drawing)• Set the clearence between the belt wheel and flange face to 1.5+/- 0.5mm and tighten the lockingscrews.• Install toothed belts and correct centre distance if necessary.• Fit the cover plate.Size <strong>OSP</strong>-E25 OPS-E32 <strong>OSP</strong>-E50Transmission ratio 1:1 2:1 1:1 2:1 1:1 2:1Axle-centres [mm] 110 109.3 110 111.4 135 133.7Axle-centres38
Change language