Modular electrical linear drives OSP-E - parker-origa.com

Modular electrical linear drives OSP-E• Secure coupling (3) on the drive shaft.• Push the coupling housing (4) onto the location ring of the drive (6).• Place fitting ring (5) into the coupling housing. Observe and ensure correct location of the location ring !• Fix-position the motor flange (6) at the coupling housing (4).• Secure the coupling unit at the linear drive with the screws (7).• Tightly screw the motor to the motor flange (6).• Tighten the screws through the window of the coupling housing. Use a screw driver to assist in the alignmentof the screws. This can be inserted into the notch at the coupling and the coupling can then beturned into the desired position.• Insert the plugs into the coupling housing to prevent the penetration of dirt.AttentionSome motor systems (e.g., Servo) are to be adjusted in advance before they are connected up to the drive.36