Catalog: Wood Construction Connectors (C-2009) - Rbb.lv

Concrete Connectors & AnchorsConcrete Connectors & AnchorsANCHORMATE ® Anchor Bolt HoldersDesigned to hold the anchor in place before the concretepour, as required in some jurisdictions.• Built-in 2x4 and 2x6 stops eliminate measuring.• Elevated bolt grippers allow easy trowel finishing.• Color-coded for easy size identification.• Lightweight, durable and easy to use.• Reusable yet cost-efficient for single application.• Threaded grippers hold each bolt in the exact samelocation and height. They secure the bolt in placewithout a nut for quicker set-up and tear-down, andprotect threads from splashing concrete.• Use the ⁵⁄₈" and ⁷⁄₈" AnchorMate to secure theSSTB to the formboard before the concrete pour.Alignment arrows (left or right) match the SSTBbolt head arrow.• Available in cartons of 100 parts or bags of 10 parts(except AM1 which are only available in cartonsof 100 parts).MATERIAL: NylonCODES: See page 12 for Code Reference Key Chart.AnchorMate ®Anchor BoltHolderModelNo.Dia. ColorAM¹⁄₂ ¹⁄₂ YellowAM⁵⁄₈ ⁵⁄₈ BlueAM³⁄₄ ³⁄₄ RedAM⁷⁄₈ ⁷⁄₈ GreenAM1 1 BlackU.S. Patent6,065,730CodeRef.180Typical AnchorMateInstallation for a2x6 MudsillTypical AnchorMateInstallation for a2x4 MudsillABS Anchor Bolt StabilizerThe ABS stabilizes the anchor bolt to prevent it frombeing pushed against the form during the concrete pour.FEATURES:• Supports the bolt approx. 8" below the top of theconcrete.• Model ABS⁵⁄₈ is for the ⁵⁄₈" SSTB and ABS⁷⁄₈ is forthe ⁷⁄₈" SSTB.• Thin section limits the effect of a cold joint.• Sized for 2x4 and 2x6 mudsills.MATERIAL: Engineered Composite Plastic.CODES: See page 12 for Code Reference Key Chart.Cut for2x4 Framing2x6FramingModel No. Diameter Color Code Ref.ABS⁵⁄₈ ⁵⁄₈ Blue180ABS⁷⁄₈ ⁷⁄₈ GreenSTRAPMATE ® Strap HolderThe StrapMate is designed to keep the STHD, LSTHD,HPAHD and PAHD straps vertically aligned during the concretepour to minimize possibility of spalling. The friction fitallows for quick and easy installation.• The StrapMate is reusable.• Works with STHD, LSTHD, HPAHD, PAHD.MATERIAL: Engineered Composite Plastic.• Designed to fit ³⁄₄" plywood forms up to 1³⁄₄" LVLforms and larger.• The strap is positioned off the front edge of theform board.CODES: See page 12 for Code Reference Key Chart.ABS Anchor BoltStabilizerTypical ABSInstallationTypicalStrapMateStrap HolderInstallationC-2009 © 2008 SIMPSON STRONG-TIE COMPANY INC. PRINTED 12/08Model No. Nails Code Ref.SM1 2-8d Duplex 180StrapMateStrap HolderU.S. Patent 6,796,09926