MSDS - HB Fuller

Skin:Mild irritant.MATERIAL SAFETY DATA SHEET FOR: EASYFILLERReplaces: April 2005. Date of issue: September 2007Inhilation:Vapour pressure is so low that inhalation does not present a problem under normal conditions. Couldcause mild irritation if used in poorly ventilated conditions.Ingestion:No data is available. No adverse effects are expected. May cause abdominal discomfort if swallowed inlarge quantities.Long term (chronic) health effectsReproductive: None establishedTarget organ(s): On the basis of long experience with the material, it is not expected thatthere will be any injury to health if used in accordance with carefuloperating procedures. However, repeated or prolonged contact withliquid product may cause skin irritation in some people.Existing health conditions affected by exposure:None established12. ECOLOGICAL INFORMATIONOverview: No ecological information available13. DISPOSALDispose strictly in accordance with local industrial waste disposal and environmental protectionregulation.14. TRANSPORT INFORMATIONManufacturer's Code: Not applicableUN Number: None assignedDangerous Goods Class: None assignedSubsidiary Risk: None assignedHazchem Code: None assignedPoisons Schedule: Not scheduledPackaging Group: None assignedStorage and Transport: This product is a not Dangerous Good for the purpose of transport.DOT:IATA:15. REGULATORY INFORMATIONAll components of this material are registered with Nicnas and appear on the AICS.16.OTHER INFORMATIONPage 4 of 5

MATERIAL SAFETY DATA SHEET FOR: EASYFILLERReplaces: April 2005. Date of issue: September 2007The calcium carbonate in this product may contain a small amount of respirable crystalline silica.Respirable crystalline silica has been classified as a Group 2A carcinogen (The agent is probablycarcinogenic to humans) by IRAC. Chronic exposure to high levels of crystalline silica may lead toimpaired lung function and cause silicosis. This hazard is not present in the product as supplied.However when cutting, sanding or drilling the DRY product with power tools, a suitable dust mask (forselection guide see AS 1715) should be worn.Contact point: Technical Manager (03) 9797 6222This MSDS summarises at the date of issue our best knowledge of the health and safety hazard information ofthe product, and in particular, how to safely handle and use the product in the workplace. Since H.B. FullerCompany Australia Pty Ltd cannot anticipate or control the conditions under which the product may be used,each user must, prior to usage, review this MSDS in the context of how the user intends to handle and use theproduct in the workplace.If clarification or further information is needed to ensure that an appropriate assessment can be made, the usershould contact this company.Our responsibility for the products sold is subject to our standard terms and conditions, a copy of which is sent toour customers and is also available on request.Page 5 of 5