warp/m service manual - ADB Lighting Technologies
warp/m service manual - ADB Lighting Technologies
warp/m service manual - ADB Lighting Technologies
- No tags were found...
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
WARP HeadWARP Head8.7 Replace the Back Lens on 22°-50° WARPRequired Tool(s) Spare Part Code Preliminary readingFlat Screw DriverScrew Driver PZ21001.61.320 Chapter 8.121. Unplug the WARP2. Open the two lenses cover3. Remove the Diaphragm (see chapter 8.13)4. Put Front and back lenses at Full5. Remove the 3 taptite screws6. Remove the 3 Isolations and the <strong>ADB</strong> Clip7. Change the Lens1001.61.320 includes:• Back Lens 22°-50°• 3 New screws• 3 Isolations• 3 <strong>ADB</strong> ClipService Manual - page 86Issue 0.9www.adblighting.com