warp/m service manual - ADB Lighting Technologies

Motorised Yoke8.3 Replace the ReflectorRequired Tool(s) Spare Part Code Preliminary readingHexagonal H4Pozidrive PZ21001.61.010 Chapter 8.21. Unplug the WARP and remove the lamp:2. Remove the Light Box from the WARP (see Chapter 8.2)3. Remove the 2 Cones for heat4. Remove screws M3 on the Front of the cone (PZ2)5. Remove Screws H4 on the back (near the Peak and Flat)6. Open the Light box7. Replace the Reflector31001.61.010 includes:• 1 reflector• 4 reflector Springs• 2 Screws M 3 * 12 + 2 washers• 2 Nuts M3 auto block• 1 connector 3pts and 3 crimps4WARNING:First Time you change the reflector, youhave to replace taptite screws (front of thesink) by screws M3*12 (provided withspare parts 1001.60.010)Cone for HeatReflector Spring152Service Manual - page 76Issue 0.9www.adblighting.com