warp/m service manual - ADB Lighting Technologies

Motorised Yoke7.29 Change motor GearsRequired Tool(s) Spare Part Code Preliminary readingHexagonal key 1.5 1001.65.660 Chapter 7.28.1Change with motors outside1. Remove 2 screws in the small gear2. Slide out the 2 gears in same time3. Replace gears (use Loctite 243 for the 2 screws)You can change gears with motors on Motors Wing1. Remove locking plate under the gears motor you want change2. Remove the 2 screws from the small gear.3. Push the Motor assembly against the motor Wing to disconnect from wheels.4. Remove the 2 gears at same time1001.65.660 includes :• 8 Shutter gears• 2 Accessorygears• 2 Lens Gear• 12 small Gears• 26 Screws M3*4WARNING:‣ Gears Setting are different betweenshutters / accessory / lenses motorassembly.‣ For shutters, you have a Top and aBottom setting, please refer tochapter 7.26.2www.adblighting.com Service Manual - page 71Issue 0.9