warp/m service manual - ADB Lighting Technologies

Motorised Yoke7.25 Replace Pan Belt and Coarse GearRequired Tool(s) Spare Part Code Preliminary readingScrew Driver PZ2Circlips PliersFlat ScrewdriverOpen Ended Spanner 81001.65.6701001.65.810Chapter 7.24Chapter 7.13To replace the PAN Belt9. Remove the Pan Coarse Sensor10. Remove the 10 Taptite Screws from the Pan Housing11. Remove the Circlpis12. Slide down the Pan Housing13. Replace the Pan Belt14. Before place the new one, put it in the Pan HousingTo replace the Coarse Gear1. Put the screw driver into the axis to lock the position2. Use the Open ended spanner to tighten the nut.3. Remove the axis from the Pan Housing4. Unclip the magnet from the Plastic Gear.1001.65.670 includes :• 1 PAN Belt• 12 Screws M4*8 (not Taptite)1001.65.810 includes :• 1 Complete Gear with Magnet• 1 Nut + 1 Washer1Put the Belt into thehousing beforereassemble12Service Manual - page 66Issue 0.9www.adblighting.com