warp/m service manual - ADB Lighting Technologies

Motorised Yoke7.24.2 How to replace the motorised yoke on the Top BoxRequired Tool(s) Spare Part Code Preliminary readingWARP KeyFlat ScrewdriverNone Chapter 7.5To replace the PAN Belt1. Put the Pan Motor on the right side2. Turn anticlockwise the Pan shaft to the mechanical end stop (you must have 2 shaft slothorizontal)3. Slide the Top Box through the shaft with Opened Panel front of you4. Slide the lock plate and clamp the 2 bended part into the topbox5. Grip the shaft nut with the WARP key6. Replace the Pan Belt7. Bend one of the lock plate strip to fix the nut8. Pass trough the shaft and connect correctly:Left 1Righ• Security Cable• WARP Link 1• Ground Cable• Lamp Wire7.2523IMPORTANT:You Must Calibrate Pan Axisafter this operation4www.adblighting.com Service Manual - page 65Issue 0.9