warp/m service manual - ADB Lighting Technologies
warp/m service manual - ADB Lighting Technologies warp/m service manual - ADB Lighting Technologies
Introduction1 IntroductionAbout This GuideThis manual is for the service and maintenance of WARP/M. It is intended to serve as areference for personnel who are trained in the service and repair of the WARP/M.WARP/M is warranted for one (1) year from the date of purchase. ADB assumes noresponsibility for damage to units occurring from improper service or being adjusted contraryto these instructions. These units will not be covered by this warranty.The following procedures are designed to be performed by a qualified service technician.This document is intended as a guide and does not provide the detail necessary for a noviceto make repairs.“Spare Parts Kit” list contains the parts required to make repairs described in this document.Always disconnect the power to the system before dismantling any component to avoidshorts and possible component damage.Service Manual - page 4Issue 0.9www.adblighting.com
Level Maintenance Description2 Level Maintenance Description2.1 Level DescriptionThe following chart describes three Maintenance levels:Level Description DocumentationWho:• Users• Theatre TechnicianLevel 1Level 2Level 3Action:• Usual Maintenance• Cleaning• Head Adjusting• Change Fuses• Clean IR Sensor• All access into Web Page• Load a new SoftwareWho:• Technician with ADB TrainingAction:• Access to all functions for normal operator• Replace mechanical sub-assembly• Replace Board• Change Ring Compartment• Send Back sub-assembly to ADB After SalesWho:• ADB After Sales or equivalentAction:• All accessUser ManualUser Manual+Service ManualInternalADBDocumentationThis guide is for qualified service technician level 2 and level 3.To become a qualified service technician level 2 a special training is necessary.Information about the level 2 trainings, please ask your local dealer or contact ADB.www.adblighting.com Service Manual - page 5Issue 0.9
- Page 1: Motorised WARPService ManualIssue 0
- Page 4 and 5: IndexIndexFOREWORD ................
- Page 8 and 9: Tools3 ToolsAdequate tools are requ
- Page 10 and 11: Spare Parts4.2 Spare Parts for the
- Page 12 and 13: Spare Parts4.2.2 Spare Parts for WA
- Page 14 and 15: Spare PartsConnector cable Power 10
- Page 16 and 17: Trouble Shooting5.2 Problems with T
- Page 18 and 19: Trouble Shooting5.4 Problems with S
- Page 20 and 21: Trouble Shooting5.5 Problems with a
- Page 22 and 23: Technical Description6 Technical De
- Page 24 and 25: Technical Description6.2.1 24 V Pow
- Page 26 and 27: Technical Description6.2.3 Boards D
- Page 28 and 29: Technical Description6.3.1.3 PCB 14
- Page 30 and 31: Technical Description6.3.2 Pan & Ti
- Page 32 and 33: Technical Description6.3.8 Descript
- Page 34 and 35: Technical Description6.4 Wheels dri
- Page 36 and 37: Technical DescriptionFunctions:This
- Page 38 and 39: Technical DescriptionFunctions:This
- Page 40 and 41: Motorised Yoke7 Motorised Yoke - Ma
- Page 42 and 43: Motorised Yoke7.3 Open Motor WingRe
- Page 44 and 45: Motorised Yoke7.5 Replace Front Pan
- Page 46 and 47: Motorised Yoke7.7 Change Motor Boar
- Page 48 and 49: Motorised Yoke7.9 Replace PCB Shutt
- Page 50 and 51: Motorised Yoke7.11 Replace Top Box
- Page 52 and 53: Motorised Yoke7.13 Replace Coarse P
- Page 54 and 55: Motorised Yoke7.15 Replace Coarse T
Introduction1 IntroductionAbout This GuideThis <strong>manual</strong> is for the <strong>service</strong> and maintenance of WARP/M. It is intended to serve as areference for personnel who are trained in the <strong>service</strong> and repair of the WARP/M.WARP/M is warranted for one (1) year from the date of purchase. <strong>ADB</strong> assumes noresponsibility for damage to units occurring from improper <strong>service</strong> or being adjusted contraryto these instructions. These units will not be covered by this warranty.The following procedures are designed to be performed by a qualified <strong>service</strong> technician.This document is intended as a guide and does not provide the detail necessary for a noviceto make repairs.“Spare Parts Kit” list contains the parts required to make repairs described in this document.Always disconnect the power to the system before dismantling any component to avoidshorts and possible component damage.Service Manual - page 4Issue 0.9www.adblighting.com