warp/m service manual - ADB Lighting Technologies
warp/m service manual - ADB Lighting Technologies
warp/m service manual - ADB Lighting Technologies
- No tags were found...
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Motorised Yoke7.9 Replace PCB Shutter leftRequired Tool(s) Spare Part Code Preliminary readingFlat Screwdriver 1001.65.210Chapter 7.1Chapter 7.81. Switch OFF and Unplug the WARP2. Remove PAN & TILT Board (see MS W/M008)3. Disconnect WARP Link 3,IR Sensor Cable4. Disconnect all Motors5. Remove the 4 screws6. Replace the Board 6 Drivers1001.65.230 includes:• Complete left board 6 drivers• 5 Screws M3*8• 5 WashersImportant:• Before switch on, remove accessories(iris, gobo, …)• When you restart ; all rings will calibrateMOTOR LABELSL3 L2 L1 L4 L5 L6M1 M2 M3 M4 M5 M61001.65.210Service Manual - page 46Issue 0.9www.adblighting.com