warp/m service manual - ADB Lighting Technologies
warp/m service manual - ADB Lighting Technologies
warp/m service manual - ADB Lighting Technologies
- No tags were found...
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Technical DescriptionFunctions:This board PCB 1525 is designed to:• Control all Motors in the Left Motor Wing: Shutter B, Shutter C, Front Acc. And ZoomComponents:Components you can change on this board are:• Fuse 2A (spare part code 1001.65.300)Reset procedure:When you switch On the WARP/M, all shutter rings will turn automatically to the IR Sensor.When the Silvered index of the ring passes in front of the IR Sensor, the ring stops and goes back tothe 0 position.If the ring doesn’t stop in front of the IR sensor, the reset has failed.In this case, send a calibration as explain in the user <strong>manual</strong>.Service Manual - page 34Issue 0.9www.adblighting.com