MS Thesis R. Hager - Hawaii National Marine Renewable Energy ...

Figure 4. 5 Drawing in Design Modular7. Highlight either Vertical or Horizontal, as seen in Figure 4.6, so as to apply anexact length to a selected line.8. Under the Details View insert the desired length to the corresponding line, asseen in Figure 4.6.9. Draw desired the shape, as seen in Figure 4.6, in increments of 0.2 in. (0.51 cm)along the z-axis. In this work all bodies have equal in drafts of 5 in. (12.7 cm) andwaterline cross-sectional areas of 35.25 in. 2 (227 cm 2 ).10. Connect points along the curve using the Spline tool under the Draw tab. Notea P will appear when a point has been selected.11. After selecting the points to connect, right-mouse click and select Open End, asseen in Figure 4.7.60