MS Thesis R. Hager - Hawaii National Marine Renewable Energy ...

: Local data has changed, and the cell’s output needs to be regenerated.: The output is current and there are no input errors.Figure 4. 3 System Data Sharing4.2.1 Geometry CellDouble-clicking the Geometry cell will launch a data-integrated workspace called DesignModular, as seen in Figure 4.4. In Design Modular the body is drawn, which will beimported into the mesh cell. To create the bodies the following steps are taken:1. Select the desired units.2. Highlight the ZX Plane in the Tree Outline and select the icon in orderto work in the ZX Plane, as seen in Figure 4.5.3. Select the Sketching tab on the bottom of the Tree Outline. Note the userdefines the body’s position with respect to the global coordinate system whensketching the body. Additionally, the user will later specify the xy-plane as thestill water level.58