Manual Ossa Explorer - Ossa Canada

Sparkplug
To access the sparkplug detach the right side cover (see fig. 1).
Once the cover has been removed, the motorcycle’s electrical system
can be accessed. Carefully but firmly, pull away the hood that
provides current, leaving the upper part of the sparkplug exposed.
Using a special sparkplug tool, unscrew it and take it out from the
right side of the motorcycle (see fig. 2).
The sparkplug should be checked regularly and a spare
sparkplug should be carried at all times in case it comes
off. The sparkplug can accumulate charcoal and
dirt with use. For this reason, it can be removed and
cleaned so that it lasts longer.
40 User manual
Right side panel
(Fig. 1)
Observe the distance between the electrode and
the arch. This distance should be 0.7 mm.
NOTE: The sparkplug should not be handled if
the motorcycle is hot.
1
2
3
(Fig. 2) Spark
To extract the side cover, 1: bend it slightly until releasing one of
the fixing snaps. 2: move the cover laterally, without turning it, to
release the other fixing snap. 3: pull the cover out.
Fig: