Quick Reference for End-Users Lambda Transmitter LT2 ... - lamtec

2 SafetyWARNING!In the event of excess pressure and temperatures above 200°C in the gas channel, dismantlingthe LT2 Lambda probe or the installation fitting lead to the emission of gases.- Switch off the facility before opening. If this is not possible, wear protective clothing and aprotective mask.- Put up appropriate warning signs near the installation site.- Close the aperture at once. You can get adequate sealing flanges, (blind flang) as an accessory.2.2.6 Important Notes on Shutdown/Return to ServiceThe LT2 Lambda transmitter and the LS2 Lambda probe form a high quality electronic measurementsystem. Treat them with care at all times, including during shutdown, transport andstorage.ShutdownCAUTION!Do not switch the LT2 Lambda transmitter off as long as the LS2 Lambda probe is mounted;including when the relevant facility has been shut down. Residual gases cause corrosion andmay damage system parts.Do not store the instruments outdoors without protection!Always store in a dry place, if possible in the original packaging.When dismantling, protect cable ends and plugs against corrosion and dirt. Corroded plugsmay cause malfunction.If possible, transport in the original packaging.Return to serviceAccording to chapter 6 Commissioning / Shutdown.2.2.7 Environmental Protection, Waste DisposalThe LT2 Lambda transmitter's construction is also based on environmental considerations.The modules can easily be separated and sorted into distinct types, and recycled accordingly.10