Series 45 Axial Piston Open Circuit Pumps Technical Information ...

Series 45 Axial Piston Open Circuit PumpsTechnical InformationFrame EOrder code (continued)R S P C D E F G H J K L M NR Product E Frame100B 130B 147CER E Frame, variable displacement open circuit pump • • •S RotationL Left Hand (counterclockwise) • • •R Right Hand (clockwise) • • •P Displacement100B 100 cm³/rev [6.10 in³/rev] •130B 130 cm³/rev [7.93 in³/rev] •147C 147 cm³/rev [8.97 in³/rev] •CControl typePC Pressure Compensator • • •BC* Pressure Compensator (290-310 bar) [4200-4500 psi] • •LB Load Sensing/Pressure Comp. with internal bleed orifice • • •BB* Load Sensing/Pressure Comp. with internal bleed orifice (290-310 bar)• •[4200-4500 psi]LS Load Sensing/Pressure Comp. • • •BS* Load Sensing/Pressure Comp. (290-310 bar) [4200-4500 psi] • •RP Remote Pressure Compensator • • •BP* Remote Pressure Compensator (290-310 bar) [4200-4500 psi] • •AGBE*ARBR*Electric on/off, 12VDC, Normally Closed, Deutsch(CCW rotation) onlyElectric on/off, 12VDC, Normally Closed, Deutsch(CCW rotation) only (290-310 bar) [4200-4500 psi]Electric on/off, 12VDC, Normally Closed, Deutsch(CW rotation) onlyElectric on/off, 12VDC, Normally Closed, Deutsch(CW rotation) only (290-310 bar) [4200-4500 psi]• • •• •• • •• •* Not available on 147cc pumps520L0519 • Rev GK • March 201293

Series 45 Axial Piston Open Circuit PumpsTechnical InformationFrame EOrder code (continued)R S P C D E F G H J K L M ND PC setting (2 digit code, 10 bar increments) E Frame100B 130B 147CExample 25 = 250 bar (3625 psi)10–26 100 to 260 bar [1450 to 3771 psi] • • •27-28 270 to 280 bar [3916 to 4061 psi] • •29-31 290-310 bar [4206 to 4496 psi] • •ELoad sensing setting (2 digit code, 1 bar increments)Example20 = 20 bar (290 psi)10-34 10 to 34 bar [145 to 508 psi] • • •NN Not applicable (pressure compensated only controls) • • •F Not usedNN Not applicable • • •G Pilot/Choke OrificeN None (standard) • • •H Gain Orifice3 1.0 mm diameter • • •94 520L0519 • Rev GK • March 2012

Series 45 Axial Piston Open Circuit PumpsTechnical InformationFrame EOrder code (continued)R S P C D E F G H J K L M NJK5S1S2S4Input Shaft1.5 inch straight keyed14 tooth 12/24 pitch17 tooth, 12/24 pitch13 tooth, 8/16 pitchAuxiliary Mount/Endcap StyleAuxiliary Description Endcap Style Inlet Porting Outlet Porting Endcap Description CodeNone Axial Split Flange Split Flange Inlet - Code 61 Split Flange Port 4 Bolt (2.5 inch port 0.5 inch threads)Outlet - Code 62 Split Flange Port 4 Bolt (1.25 inch port 0.5 inch threads)None Radial Split Flange Split Flange Inlet - Code 61 Split Flange Port 4 Bolt (2.5 inch port 0.5 inch threads)Outlet - Code 62 Split Flange Port 4 Bolt (1.25 inch port 0.5 inch threads)Running Cover Radial Split Flange Split Flange Inlet - Code 61 Split Flange Port 4 Bolt (2.5 inch port 0.5 inch threads)Outlet - Code 62 Split Flange Port 4 Bolt (1.25 inch port 0.5 inch threads)SAE-A, 11 teeth Radial Split Flange Split Flange Inlet - Code 61 Split Flange Port 4 Bolt (2.5 inch port 0.5 inch threads)Outlet - Code 62 Split Flange Port 4 Bolt (1.25 inch port 0.5 inch threads)SAE-A, 9 teeth Radial Split Flange Split Flange Inlet - Code 61 Split Flange Port 4 Bolt (2.5 inch port 0.5 inch threads)Outlet - Code 62 Split Flange Port 4 Bolt (1.25 inch port 0.5 inch threads)SAE-B, 13 teeth Radial Split Flange Split Flange Inlet - Code 61 Split Flange Port 4 Bolt (2.5 inch port 0.5 inch threads)Outlet - Code 62 Split Flange Port 4 Bolt (1.25 inch port 0.5 inch threads)SAE-B, 14 teeth Radial Split Flange Split Flange Inlet - Code 61 Split Flange Port 4 Bolt (2.5 inch port 0.5 inch threads)Outlet - Code 62 Split Flange Port 4 Bolt (1.25 inch port 0.5 inch threads)NLNPRPTPAPBPLPSAE-BB, 13 teeth/withM12 threadRadial Split Flange Split Flange Inlet - Code 61 Split Flange Port 4 Bolt (2.5 inch port M12 metric threads)Outlet - Code 62 Split Flange Port 4 Bolt (1.25 inch port M12 metric threads)U6SAE-BB, 15 teeth Radial Split Flange Split Flange Inlet - Code 61 Split Flange Port 4 Bolt (2.5 inch port 0.5 inch threads)Outlet - Code 62 Split Flange Port 4 Bolt (1.25 inch port 0.5 inch threads)SAE-C, 14 teeth Radial Split Flange Split Flange Inlet - Code 61 Split Flange Port 4 Bolt (2.5 inch port 0.5 inch threads)Outlet - Code 62 Split Flange Port 4 Bolt (1.25 inch port 0.5 inch threads)SAE-CC, 17 teeth Radial Split Flange Split Flange Inlet - Code 61 Split Flange Port 4 Bolt (2.5 inch port 0.5 inch threads)Outlet - Code 62 Split Flange Port 4 Bolt (1.25 inch port 0.5 inch threads)VPCPWPJ Input Shaft/Auxiliary Mount/Endcap Available CombinationsE Frame100B 130B 147CK5AP • • •K5BP • • •K5CP • • •K5NL • • •K5NP • • •K5RP • • •K5VP • • •S1AP • • •S1BP • • •S1CP • • •S1LP • • •S1NL • • •S1NP • • •S1RP • • •S1TP • • •S1VP • • •S2AP • • •E Frame100B 130B 147CS2BP • • •S2CP • • •S2NL • • •S2NP • • •S2RP • • •S2TP • • •S2VP • • •S2WP • • •S4AP • • •S4BP • • •S4CP • • •S4NL • • •S4NP • • •S4RP • • •S4U6 • • •S4TP • • •S4VP • • •S4WP • • •520L0519 • Rev GK • March 201295

Series 45 Axial Piston Open Circuit PumpsTechnical InformationFrame EOrder code (continued)R S P C D E F G H J K L M NE FrameK Shaft seal100B 130B 147CA Single (Viton) • • •K Mounting flange and housing port style1 SAE-C Flange 4-bolt/SAE O-ring boss ports • • •K Not usedN Not applicable • • •L Displacement limiterNNN None (plugged) • • •AAA Adjustable, factory set at max angle • • •M Special hardwareNNN None • • •N Special featuresNNN None • • •96 520L0519 • Rev GK • March 2012

Series 45 Axial Piston Open Circuit PumpsTechnical InformationFrame EPerformance E100BFlow and power data valid at 49°C [120°F] and viscosity of 17.8 mm²/sec [88 SUS].Flow vs. speedInput power vs. speedFlow (l/min)25020015010050605040302010Flow (US gal/min)Power (kW)150125100755025310 bar [4495 psi]210 bar [3045 psi]140 bar [2030 psi]200175150125100755025Power (hp)00 500 1000 1500 2000-1Speed min (rpm)0P104 008E00 500 1000 1500 2000-1Speed min (rpm)0P104 009EEfficiency (%)EfficiencySystem Pressure: 310 Bar - Inlet Pressure: 1.0 Bar abs -Inlet Temperature: 49C100Volumetric Efficiency95908580Overall Efficiency7570656055500 500 1000 1500 2000 2500Input Speed (rpm)P108 458ENoise (DBA)Noise9085807570Inlet Pressure: 1.0 Bar abs -Inlet Temperature: 49CGeneral Operating Range310 bar - No Flow140 bar - Full Flow65600 500 1000 1500 2000 2500Input Speed (rpm)P108 459EThe chart on the rightshows allowable inletpressure and speed atvarious displacements.Greater speeds and lowerinlet pressures are possibleat reduced displacement.Operating outside ofacceptable limits reducespump life.Inlet pressure vs. speedInlet Pressure (bar abs)1.6100% 90% 80%1.51.41.31.21.11.00.90.80.70.62000 2200 2400 2600 2800 3000 3200-1Shaft Speed min (rpm)86420369(psi gauge)(in Hg vac)P104 017E520L0519 • Rev GK • March 201297

Series 45 Axial Piston Open Circuit PumpsTechnical InformationFrame EPerformance E130BFlow vs. speedInput power vs. speedFlow (l/min)3002502001501005070605040302010Flow (US gal/min)Power (kW)150120906030310 bar [4495 psi]210 bar [3045 psi]140 bar [2030 psi]200175150125100755025Power (hp)00 500 1000 1500 2000-1Speed min (rpm)0P104 010E00 500 1000 1500 2000-1Speed min (rpm)0P104 011EEfficiencyNoiseEfficiency (%)System Pressure: 310 Bar -Inlet Pressure: 1.0 Bar abs -Inlet Temperature: 49C100Volumetric Efficiency959085Overall Efficiency807570656055500 500 1000 1500 2000Input Speed (rpm)P108 460ENoise (DBA)90858075Inlet Pressure: 1.0 Bar abs -Inlet Temperature: 49CGeneral Operating Range310 bar - No Flow140 bar - Full Flow7065600 500 1000 1500 2000Input Speed (rpm)P108 461EThe chart on the rightshows allowable inletpressure and speed atvarious displacements.Greater speeds and lowerinlet pressures are possibleat reduced displacement.Operating outside ofacceptable limits reducespump life.Inlet pressure vs. speedInlet Pressure (bar abs)1.6100% 90% 80%1.51.41.31.21.11.00.90.80.70.61800 2000 2200 2400 2600 2800-1Shaft Speed min (rpm)86420369(psi gauge)(in Hg vac)P104 018E98 520L0519 • Rev GK • March 2012

Series 45 Axial Piston Open Circuit PumpsTechnical InformationFrame EPerformance E147CFlow vs. speedInput power vs. speedFlow (l/min)3503002502001501005000 500 1000 1500 2000-1Speed min (rpm)9080706050403020100Flow (US gal/min)P104 012EPower (kW)150120906030260 bar [3770 psi]210 bar [3045 psi]140 bar [2030 psi]00 500 1000 1500 2000-1Speed min (rpm)2001751501251007550250P104 013EPower (hp)EfficiencyNoiseEfficiency (%)System Pressure: 260 Bar -Inlet Pressure: 1.0 Bar abs -Inlet Temperature: 49C100Volumetric Efficiency959085Overall Efficiency807570656055500 500 1000 1500 2000Input Speed (rpm)P108 462ENoise (DBA)9085807570Inlet Pressure: 1.0 Bar abs -Inlet Temperature: 49C65600 500 1000 1500 2000Input Speed (rpm)P108 463EGeneral Operating Range140 bar - Full Flow210 bar - No FlowThe chart on the rightshows allowable inletpressure and speed atvarious displacements.Greater speeds and lowerinlet pressures are possibleat reduced displacement.Operating outside ofacceptable limits reducespump life.Inlet pressure vs. speedInlet Pressure (bar abs)1.6100% 90% 80%1.51.41.31.21.11.00.90.80.70.61800 2000 2200 2400 2600 2800-1Shaft Speed min (rpm)86420369(psi gauge)(in Hg vac)P104 019E520L0519 • Rev GK • March 201299

Series 45 Axial Piston Open Circuit PumpsTechnical InformationFrame EHydraulic ControlsPressure Compensated ControlsSchematicResponse/recovery times(ms) Response RecoveryE100B 45 175E130B 55 175E147C 60 190M1BM2PC Setting rangeModel PC BCE100BE130BE147C100-280 bar[1450-4060 psi]100-280 bar[1450-4060 psi]100-260 bar[1450-3770 psi]290-310 bar[4205-4495 psi]290-310 bar[4205-4495 psi]N/AM4L2SL1 P104 025LegendB = OutletS = InletL1, L2 = Case drainM2 = System pressure gauge portM4 = Servo pressure gauge portRemote Pressure Compensated ControlsResponse/recovery times(ms) Response RecoveryE100B 45 175E130B 55 175E147C 60 190SchematicXXBPC Setting rangeModel RP BPE100BE130BE147C100-280 bar[1450-4060 psi]100-280 bar[1450-4060 psi]100-260 bar[1450-3770 psi]290-310 bar[4205-4495 psi]290-310 bar[4205-4495 psi]N/AM1L2SL1P104 022M2M4LegendB = OutletS = InletL1, L2 = Case drainM2 = System pressure gauge portM4 = Servo pressure gauge portX = Remote PC port100 520L0519 • Rev GK • March 2012

Series 45 Axial Piston Open Circuit PumpsTechnical InformationFrame EHydraulic Controls(continued)Load Sensing/Pressure CompensatedResponse/recovery times*(ms) Response RecoveryE100B 45 200E130B 50 200E147C 60 200SchematicBXXPC Setting rangeModel LS BSE100BE130BE147C100-280 bar[1450-4060 psi]100-280 bar[1450-4060 psi]100-260 bar[1450-3770 psi]290-310 bar[4205-4495 psi]290-310 bar[4205-4495 psi]N/ALS setting rangeModel bar psiAll 10–30 145–435M1M2M4L2SL1 P104 024LegendB = OutletS = InletL1, L2 = Case drainM2 = System pressure gauge portM4 = Servo pressure gauge portX = LS signal portLoad Sensing with Bleed Orifice/Pressure CompensatedPC setting rangeModel bar psiE100B 100–310 1450–4495E130B 100–310 1450–4495E147C 100–260 1450–3770SchematicXXPC Setting rangeModel LB BBE100BE130BE147C100-280 bar[1450-4060 psi]100-280 bar[1450-4060 psi]100-260 bar[1450-3770 psi]290-310 bar[4205-4495 psi]290-310 bar[4205-4495 psi]N/ALS setting rangeModel bar psiAll 10–30 145–435BM1M2M4L2SL1 P107 792ELegendB = OutletS = InletL1, L2 = Case drainM2 = System pressure gauge portM4 = Servo pressure gauge portX = LS signal port520L0519 • Rev GK • March 2012101

Series 45 Axial Piston Open Circuit PumpsTechnical InformationFrame EElectric ControlsConnectorsDescription Quantity Ordering NumberMating Connector 1 Deutsch® DT06-2SWedge Lock 1 Deutsch® W25Socket Contact (16 and 18 AWG) 2 Deutsch® 0462-201-16141Sauer-Danfoss mating connector kit 1 K29657Continuous Duty Operating Range1201 2P003 480Percent of Rated Voltage (%)11010090807060Operating RangeNormally Closed on/off Electric PressureCompensated Controls50-40 -30 -20 -10 0 10 20 30 40 50 60 70 80 90 100Ambient Temperature (°C)P108 415EResponse/Recovery Times*(ms) Response RecoveryE100B 45 175E130B 55 175E147C 60 190SchematicPC setting rangeCode AG, AR BE, BRE100BE130BE147B100-280 bar[1450-4060 psi]100-280 bar[1450-4060 psi]100-260 bar[1450-3770 bar]290-310 bar[4205-4495 psi]290-310 bar[4205-4495 psi]N/ALS setting rangeModel bar psiAll 10-34 145-508M1L2BS L1 P108 488ELegendB = OutletS = InletL1, L2 = Case drainM1 = System pressure gauge portM2M4Normally Open on/off Electric PressureCompensated ControlsPC setting rangeCode AG, ARE100BE130BE147B100-280 bar[1450-4060 psi]100-280 bar[1450-4060 psi]100-260 bar[1450-3770 bar]LS setting rangeModel bar psiAll 10-34 145-508102 520L0519 • Rev GK • March 2012

Series 45 Axial Piston Open Circuit PumpsTechnical InformationFrame EInput shaftsShaft dataCodeK5DescriptionØ 38.08 mm [1.5 in]Straight keyedMaximum torque rating¹N•m [lbf•in]1161 [10 270]Drawing9.525 [0.375]X 38.1 [1.5] LONGSQUARE KEYØ38.075 ± 0.025[1.5 ± 0.0009]Ø42.26 ±0.125[1.664 ±0.005]54[2.13]8 ± 0.8[0.31 ± 0.03] COUPLING MUST NOTPROTRUDE BEYONDTHIS POINTP104 037E23.5 max.M8x1.25-6H thd16.5 min.3.8 max.Dia. 11.18S114-tooth spline12/24 pitch(ANSI B92.1 1970 - Class 5)800 [7080]Ø47.58 ± 0.43[1.87 ± 0.017]Ø25.53 Max.[1.01 ]14 TOOTH12/24 PITCH29.634 [1.167] PITCH ØFILLET ROOT SIDE FITCOMPATIBLE WITH ANSI B92.1-1970CLASS 5 - ALSO MATES WITHFLAT ROOT SIDE FITØ31.14 ± 0.08[1.226 ± 0.003]28 ± 0.5[1.87 ± 0.017]8 ± 0.8[0.31 ± 0.03]COUPLING MUST NOTPROTRUDE BEYOND THIS POINTP104 038ES217-tooth spline12/24 pitch(ANSI B92.1 1970 - Class 5)1150 [10178]17 TOOTH12/24 PITCH30° PRESSURE ANGLE35.983 [1.417] PITCH DIAFILLET ROOT SIDE FITCOMPATIBLE WITHANSI B92.1-1970CLASS 5 ALSO MATES WITHFLAT ROOT SIDE FITØ30.75 [1.211] MAXØ36.66 ± 0.08[1.443 ± 0.003]34 ± 0.15[1.339 ± 0.006]P104 036E8 ± 0.8[0.31 ± 0.03]54[2.126]COUPLING MUST NOTPROTRUDE BEYONDTHIS POINT1. See Input shaft torque ratings, page 18 for an explanation of maximum torque.520L0519 • Rev GK • March 2012103

Series 45 Axial Piston Open Circuit PumpsTechnical InformationFrame EInstallation drawingsAxial Ported EndcapDISPLACEMENTLIMITER PORTPERISO 11926-1SAE J1926/13/4 - 16UNF - 2BØ63.5[2.50]INLETSYSTEM PORT ‘S’172 BAR [2500 PSI]SPLIT FLANGE BOSSPERISO 6162SAE J518CODE 61WITH 1/2 - 13UNCX 30 [1.181]MIN THD88.9[3.50]SYSTEM PRESSUREGAGE PORT ‘M2’PERISO 11926 - 1SAE J1926/19/16 - 18UNF - 2B50[1.969]27.3[1.075]ALTERNATELS SIGNALPORT X66.7[2.626]PORT X31.75[1.25]50[1.969]66.68[2.63]Ø31.8[1.25]OUTLETSYSTEM PORT ‘B’414 BAR [6000 PSI]SPLIT FLANGE BOSSPERISO 6162SAE J518CODE 62WITH 1/2 - 13UNCX 25 [0.984]MIN THDP108 464EThird-angleprojectionmm [in]98[3.858]Axial Ported Endcap Installation DimensionsCASE DRAINPORT L1PER ISO 11926-1SAE J1926/11 1/16-12UN-2BLS STANDBYPRESSUREADJUSTMENT1.87[0.074]PC PRESSUREADJUSTMENT98[3.858]52[2.047]5.2[0.205]CW57.25[2.254]114.5[4.508]76[2.992]LS SIGNALPORT XPER ISO 11926-1SAE J1926/17/16-20UNF-2B302.7 MAX[11.92]282.315[11.115]191.1[7.524]CASE DRAINPORT L1SPOTFACE DEPTH111.9[4.406]191.1[7.524]114.5[4.508]57.25[2.254]Ø14.3[0.563]4XALTERNATELS SIGNALPORT XPER ISO 11926-1SAE J1926/17/16-20UNF-2BSERVOPRESSUREPORT M4PER ISO 11926-1SAE J1926/19/16-18UNF-2B182.9[7.201]167.4[6.591]167.4[6.591]Ø126.975 ± 0.025[4.999 ±0.001]132[5.197]SYSTEM PORTS S AND B275[10.827]R1 MAX[0.04]12.7[0.5]19.09[0.751]4XCASE DRAINPORT L2SPOTFACE DEPTH111.9[4.406]148.05[5.829]APPROXIMATECENTER OFGRAVITYP106 176E520L0519 • Rev GK • March 2012105

Series 45 Axial Piston Open Circuit PumpsTechnical InformationFrame EInstallation drawings(continued)Radial Ported Endcap Split Flange PortsØ31.8[1.25]OUTLET132SYSTEM PORT ‘B’[5.197]414 BAR [6000 PSI]SPLIT FLANGE BOSSPERISO 6162SAE J518CODE 62WITH 1/2 - 13UNCX 25 [0.984]MIN THD251[9.882]251[9.882]P108 465EØ63.5[2.50]INLETSYSTEM PORT ‘S’172 BAR [2500 PSI]SPLIT FLANGE BOSSPER ISO 6162SAE J518CODE 61WITH 1/2 - 13UNCX 30 [1.181]MIN THDRadial Ported Endcap Rear View27.3[1.075]ALTERNATELS SIGNALPORT X66.7[2.626]LS SIGNALPORT XSYSTEM PRESSUREGAGE PORT ‘M2’PERISO 11926 - 1SAE J1926/19/16 - 18UNF - 2B100.5[3.957]SYSTEMPORT S100.5[3.957]SYSTEMPORT BDISPLACEMENTLIMITER PORTPER ISO 11926-1SAE J1926/13/4-16UNF-2BDISPLACEMENTLIMITER PORTPERISO 11926-1SAE J1926/13/4 - 16UNF - 2B100.5[3.957]SYSTEMPORT S100.5[3.957]SYSTEMPORT BSYSTEM PRESSUREGAGE PORT M2PER ISO 11926-1SAE J1926/19/16-18UNF-2B27.3[1.075]ALTERNATELS SIGNALPORT XP108 466E66.7[2.626]LS SIGNALPORT X106 520L0519 • Rev GK • March 2012

Series 45 Axial Piston Open Circuit PumpsTechnical InformationFrame EInstallation drawings(continued)Radiall Ported Endcap Installation DimensionsLS STANDBYPRESSUREADJUSTMENTPC PRESSUREADJUSTMENT2.02[0.08]CASE DRAINPORT L1PER ISO 11926-1SAE J1926/11 1/16-12UN-2B4.86[0.192]114.5[4.508]52[2.047]CW57.25[2.254]LS SIGNALPORT XPER ISO 11926-1SAE J1926/17/16-20UNF-2B304[11.969]302.7 MAX[11.92]191.1[7.524]76[2.992]111.9[4.406]CASE DRAINPORT L1SPOTFACE DEPTH57.25[2.254]114.5[4.508]191.1[7.524]Ø14.3[0.563]4XALTERNATELS SIGNALPORT XPER ISO 11926-1SAE J1926/17/16-20UNF-2BSERVOPRESSUREPORT M4PER ISO 11926-1SAE J1926/19/16-18UNF-2B182.9[7.201]167.4[6.591]167.4[6.591]66.68[2.63]Ø126.975 ± 0.025[4.999 ± 0.001]Ø31.8[1.25]OUTLET132[5.197]SYSTEM PORT ‘B’414 BAR [6000 PSI]SPLIT FLANGE BOSSPERISO 6162SAE J518CODE 62WITH 1/2 - 13UNCX 25 [0.984]MIN THD31.75[1.25]251[9.882]R1 MAX[0.04]12.7[0.5]19.09[0.751]4XFront Mounting FlangeLS STANDBYPRESSUREADJUSTMENT111.9[4.406]CASE DRAINPORT L2SPOTFACE DEPTH156.79[6.173]1.87[0.074]251[9.882]APPROXIMATECENTER OFGRAVITYPC PRESSUREADJUSTMENTP106 178EØ63.5[2.50]INLETSYSTEM PORT ‘S’172 BAR [2500 PSI]SPLIT FLANGE BOSSPER ISO 6162SAE J518CODE 61WITH 1/2 - 13UNCX 30 [1.181]MIN THD5.2[0.205]114.5[4.508]CW57.25[2.254]114.5[4.508]57.25[2.254]Ø14.3[0.563]4XP108 467E520L0519 • Rev GK • March 2012107

Series 45 Axial Piston Open Circuit PumpsTechnical InformationFrame EInstallation drawings(continued)Radial Endcap Clockwise114.450[4.50]296.9[11.69]190.8[7.51]P108 471ERadial Endcap Counterclockwise190.8[7.51]Axial Endcap Clockwise114.2[4.50] 296.9[11.69]114.2[4.50]296.9[11.69]P108 472E190.8[7.51]Axial Endcap CounterclockwiseP108 473E190.8[7.51]Third-angleprojectionmm [in]114.2[4.50] 296.9[11.69]P108 474E108 520L0519 • Rev GK • March 2012

Series 45 Axial Piston Open Circuit PumpsTechnical InformationFrame EAuxiliary mounting padsSAE-A auxiliary mounting padDimensions9.06[0.36]MIN COUPLINGØ10.4 ± 0.12CLEARANCE3/8-16 UNC-2B THD18 [0.71] MINTHD DEPTH4X301.7[11.878]MOUNTINGFLANGEØ88.62[3.489]Ø82.6 +0.0760+.003[3.252 0 ]106.4[4.189]2XSpecificationsCoupling 9-tooth 11-tooth53.2[2.094]2XSpline minimum 13.5 mm [0.53 in] 13.5 mm [0.53 in]engagementMaximum torque 107 N•m [950 lbf•in] 147 N•m [1300 lbf•in]O-RING SEALREQUIREDREFERENCE82.22 [3.237] I.D.2.62 [0.103] CROSS SECTIONP/N 50003731.956[0.077]8.1 ± 0.7[0.319 ±0.028]43.261[1.703]MIN SHAFTCLEARANCECOUPLING-SAE A:SPLINE: 11 TOOTH16/32 PITCH30° PRESSURE ANGLE17.463 [0.6875] PITCH DIAFILLET ROOT SIDE FITPER SAE B92.1-1970 CLASS 6COUPLING-SAE A:SPLINE: 9 TOOTH16/32 PITCH30° PRESSURE ANGLE4.288 [0.5625] PITCH DIAFILLET ROOT SIDE FITPER SAE B92.1-1970 CLASS 6P104 068ESAE-B auxiliary mounting padDimensions1.956[0.077]328.2[12.921]MOUNTINGFLANGE1/2 -13UNC-2B THD26.25 [1.03] MINTHD DEPTH4XØ107.82[4.245]Ø101.65 +0.0760+.003[4.002 0 ]73[2.874]2X146[5.748]2XMIN SHAFTCLEARANCESpecificationsCoupling 13 tooth 15 tooth 14 toothSpline Minimum Engagement 14.2 [0.559] 16.1 [0.634] 18.3 [0.720]Maximum Torque 249 N•m [2200 lbf•in] 339 N•m [3000 lbf•in] 452 N•m [4000 lbf•in]Dimension A 9.67 [0.38] 9.67 [0.38] 33.01 [1.30]Dimension B 69.46 [2.74] 69.46 [2.74] 57.96 [2.282]520L0519 • Rev GK • March 2012O-RING SEALREQUIREDREFERENCE101.27 [3.987] I.D.2.62 [0.103] CROSS SECTIONP/N 5000099AMIN COUPLINGCLEARANCEBP104 066ECOUPLING-SAE B:SPLINE: 13 TOOTH16/32 PITCH30° PRESSURE ANGLE20.638 [0.8125] PITCH DIAFILLET ROOT SIDE FITPER SAE B92.1-1970 CLASS 6COUPLING-SAE B-B:SPLINE: 15 TOOTH16/32 PITCH30° PRESSURE ANGLE23.813 [0.9375] PITCH DIAFILLET ROOT SIDE FITPER SAE B92.1-1970 CLASS 6L option (not SAE)COUPLING-SAE C:SPLINE: 14 TOOTH12/24 PITCH30° PRESSURE ANGLE29.633 [1.16665] PITCH DIAFILLET ROOT SIDE FIT109

Series 45 Axial Piston Open Circuit PumpsTechnical InformationFrame EAuxiliary mounting pads(continued)See page 18 for mating pumppilot and spline dimensions.SAE-C auxiliary mounting padDimensions1/2 -13 UNC-2B THDØ12.7 ± 0.1226.25 [1.03] MINTHD DEPTH4X33.01[1.30]MINIMUMCOUPLINGCLEARANCE328.2[12.921]MOUNTINGFLANGE114.6[4.512]Ø127.05 +0.076 0+.003[5.002 0 ]57.3[2.256]Ø134.06[5.278]114.6[4.512]SpecificationsCoupling 14-tooth 17-tooth57.3[2.256]Spline minimum 18.3 mm [0.72 in] 18.3 mm [0.72 in]engagementMaximum torque 452 N•m [4000 lbf•in] 452 N•m [4000 lbf•in]O-RING SEALREQUIREDREFERENCE126.7 [4.987] I.D.2.62 [0.103]P/N 5000755CROSS SECTION1.956[0.077]57.96[2.282]MIN SHAFTCLEARANCECOUPLING-SAE C-C:SPLINE:17 TOOTH12/24 PITCH30° PRESSURE ANGLE35.992 [1.417] PITCH DIAFILLET ROOT SIDE FITPER SAE B92.1-1970 CLASS 6COUPLING-SAE C:SPLINE:14 TOOTH12/24 PITCH30° PRESSURE ANGLE29.633 [1.1667] PITCH DIAFILLET ROOTP104 067E110 520L0519 • Rev GK • March 2012

Series 45 Axial Piston Open Circuit PumpsTechnical InformationFrame EDisplacement LimitersE Frame open circuit pumps areavailable with an optional adjustabledisplacement limiter. This adjustablestop limits the pump’s maximumdisplacement.Displacement limiter cross-sectionP104 003Setting rangeE100B 40 to 100 cm³ [2.44 to 6.1 in³]E130B 70 to 130 cm³ [4.27 to 7.93 in³]E147C 87 to 147 cm³ [5.31 to 8.97 in³]Displacement per turnE100B 8.4 cm³/rev [0.51 in³/rev]E130B 8.4 cm³/rev [0.51 in³/rev]E147C 8.4 cm³/rev [0.51 in³/rev]304[11.969]302.7 max.[11.92]P108 470E520L0519 • Rev GK • March 2012111