Krohne OPTIFLEX 1300 C Level Meter Quickstart Guide ... - Instrumart

OPTIFLEX 1300 CINSTALLATION 22.1 Intended useThis TDR level transmitter measures distance, level, mass and volume of liquids, pastes,slurries, granulates and powders. It can also measure level and interface of liquids at the sametime.It can be installed on tanks, silos and open pits.2.2 Scope of deliveryINFORMATION!Check the packing list to check if you received completely all that you ordered.Figure 2-1: Scope of delivery for compact version1 Signal converter and probe - compact version.2 Probe segments. For the assembly procedure of the single rod probe, refer to the instructions that are supplied withthe device. If a single rod or coaxial probe is attached and you ordered the "segmented probe" option, only part of theprobe is attached to the device. For the assembly procedure of the segmented single rod probe, refer to How to assemblethe single rod probe (segmented probe) on page 18, refer to the instructions that are supplied with the device.For the assembly procedure of the segmented coaxial probe, refer to the instructions that are supplied with the device.The assembly instructions and small parts are in a bag attached to the housing.3 Quick Start4 CD-ROM. This contains the Handbook, the Quick Start, the Technical Datasheet and related software.09/2010 - 4000049805 - QS OPTIFLEX 1300 R08 enwww.krohne.com5