Krohne OPTIFLEX 1300 C Level Meter Quickstart Guide ... - Instrumart

5 TECHNICAL DATAOPTIFLEX 1300 CAccuracyResolution 1mm/ 0.04¨RepeatabilityAccuracy (in direct mode)Accuracy (in TBF mode)±1 mm/ ±0.04¨Liquids:±3 mm/ ±0.12¨, when distance < 10 m / 33 ft;±0.03% of measured distance, when distance > 10 m / 33 ftPowders:±20 mm / ±0.8¨Interface:±10 mm / ±0.4¨ (εr constant)±20 mm / ±0.8¨ (ε r constant)Minimum layer (interface) 50 mm / 2¨Reference conditions acc. to EN 60770Temperature +20°C ±5°C / +68°F ±10°FPressure1013 mbara ±20 mbar / 14.69 psia ±0.29 psiRelative air humidity 60% ±15%Operating conditionsTemperatureAmbient temperatureStorage temperatureProcess connection temperatureThermal shock resistancePressure-40…+80°C /-40…+175°F(Ex: see supplementary operating instructions or approval certificates)-40…+85°C /-40…+185°FStandard-40…+200°C/-40…+390°F (according to the temperature limits of the gasketmaterial. Refer to "Material" in this table.)(Ex: see supplementary operating instructions or approval certificates) 2High-Temperature (HT) and High-Temperature / High-Pressure (HT/HP) versionswith FKM/FPM and Kalrez ® 6375 gaskets+300°C / +570°F (single cable Ø2 mm / 0.08¨ probe only)(Ex: see supplementary operating instructions or approval certificates) 2HT and HT/HP versions with EPDM gaskets+250°C / +480°F (single cable Ø2 mm / 0.08¨ probe only)(Ex: see supplementary operating instructions or approval certificates) 2100°C/minOperating pressure Single cable Ø8 mm / 0.3¨ probe-1…40 barg / -14.5…580 psigsubject to process connection temperature and probe type used 2High-Pressure (HP) versionmax. 300 barg / 4350 psig (single cable Ø2 mm / 0.08¨ probe only)subject to process connection temperature and probe type used 2All other probe types-1…100 barg / -14.5…1450 psigsubject to process connection temperature and probe type used 238www.krohne.com09/2010 - 4000049805 - QS OPTIFLEX 1300 R08 en