Krohne OPTIFLEX 1300 C Level Meter Quickstart Guide ... - Instrumart

More documents

Recommendations

Info

2 INSTALLATIONOPTIFLEX 1300 C2.9.2 Traction loads on the probeTraction load depends on:• The height and shape of the tank.• The particle size and density.• The rate at which the tank is emptied.CAUTION!Risk of damage to the cable probe. High loads can break the cable.If the load on the Ø8 mm / 0.3¨ single cable probe is more than 3500 kg / 7700 lb, contact yoursupplier.CAUTION!Make sure that the tank roof is resistant to deformation at high loads.Estimated traction load on the probe in kgMaterial Probe length, 10 m Probe length, 20 m Probe length, 30 m[kg]Cement 1000 2000 3000Fly ash 500 1000 1500Wheat 300 500 1200Estimated traction load on the probe in lbMaterial Probe length, 33 ft Probe length, 65 ft Probe length, 98 ft[lb]Cement 2200 4410 6520Fly ash 1100 2200 3300Wheat 660 1100 26502.10 How to install the device on the tank2.10.1 How to assemble the single rod probe (single-piece probe)The assembly instructions and small parts are in a bag attached to the housing.2.10.2 How to assemble the single rod probe (segmented probe)The assembly instructions and small parts are in a bag attached to the housing.2.10.3 How to assemble the segmented coaxial probeThe assembly instructions and small parts are in a bag attached to the housing.18www.krohne.com09/2010 - 4000049805 - QS OPTIFLEX 1300 R08 en
OPTIFLEX 1300 CINSTALLATION 22.10.4 How to install a device with a flange connectionEquipment needed:• Device• Gasket (not supplied)• Wrench (not supplied)Figure 2-18: Flange connection• Make sure the flange on the nozzle is level.• Make sure that you use the applicable gasket for the flange and the process.• Align the gasket correctly on the flange facing of the nozzle.• Lower the probe carefully into the tank.i For more data on cable probes, refer to How to install a cable probe in the tank on page 21.• Tighten the flange bolts.i Refer to local rules and regulations for the correct torque to apply to the bolts.09/2010 - 4000049805 - QS OPTIFLEX 1300 R08 enwww.krohne.com19
Page 1 and 2: OPTIFLEX 1300 C Quick StartGuided R
Page 3 and 4: OPTIFLEX 1300 CCONTENTS4 Start-up 3
Page 5 and 6: OPTIFLEX 1300 CINSTALLATION 22.1 In
Page 7 and 8: OPTIFLEX 1300 CINSTALLATION 22.3 Vi
Page 9 and 10: OPTIFLEX 1300 CINSTALLATION 22.5 Tr
Page 11 and 12: OPTIFLEX 1300 CINSTALLATION 2Temper
Page 13 and 14: OPTIFLEX 1300 CINSTALLATION 21 23 3
Page 15 and 16: OPTIFLEX 1300 CINSTALLATION 2INFORM
Page 17: OPTIFLEX 1300 CINSTALLATION 2Figure
Page 21 and 22: OPTIFLEX 1300 CINSTALLATION 22.10.6
Page 25 and 26: OPTIFLEX 1300 CINSTALLATION 2You ca
Page 29 and 30: OPTIFLEX 1300 CINSTALLATION 22.11 E
Page 31 and 32: OPTIFLEX 1300 CELECTRICAL CONNECTIO
Page 33 and 34: OPTIFLEX 1300 CSTART-UP 44.1 Start-
Page 35 and 36: OPTIFLEX 1300 CSTART-UP 44.3.4 How
Page 37 and 38: OPTIFLEX 1300 CTECHNICAL DATA 55.1
Page 39 and 40: OPTIFLEX 1300 CTECHNICAL DATA 5Othe
Page 41 and 42: OPTIFLEX 1300 CTECHNICAL DATA 5Reso
Page 43 and 44: OPTIFLEX 1300 CTECHNICAL DATA 55.2

Krohne OPTIFLEX 1300 C Level Meter Quickstart Guide ... - Instrumart

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?