Krohne OPTIFLEX 1300 C Level Meter Quickstart Guide ... - Instrumart

OPTIFLEX 1300 CINSTALLATION 2INFORMATION!If your device has a coaxial probe, you can ignore these installation recommendations.CAUTION!Install coaxial probes in clean liquids that are not too viscous.INFORMATION!If the device has to measure the level of dangerous products (ammonia etc.), we recommendthat you use a device with the Metaglas ® option.Clearance between the probe and other objects in the tankProbe typeEmpty space (radius, R min ), around the probe[mm][inches]Coaxial 0 0Double rod 6Double cable Ø4 mm / 0.15¨ 6Single rod 7Single cable Ø4 mm / 0.15¨ 7Single cable Ø2 mm / 0.08¨ 7100 4300 122.8.2 How to attach probes to the bottom of the tankIf the liquid is agitated or turbulent, you can attach the probe to the bottom of the tank. Theprocedure to attach the probe depends on the type of probe used.For more data, refer to the Handbook.2.8.3 StandpipesUse a standpipe if:• There is highly conductive foam in the tank.• The liquid is very turbulent or agitated.• There are too many other objects in the tank.• The device is measuring a liquid (petro-chemicals) in a tank with a floating roof.For more data, refer to the Handbook.09/2010 - 4000049805 - QS OPTIFLEX 1300 R08 enwww.krohne.com15