Krohne OPTIFLEX 1300 C Level Meter Quickstart Guide ... - Instrumart

More documents

Recommendations

Info

2 INSTALLATIONOPTIFLEX 1300 C2.7.2 General information for nozzlesCAUTION!Follow these recommendations to make sure that the device measures correctly.Figure 2-10: Recommended nozzle dimensions1 Recommended conditions: h ≤ d, where h is the height of the tank nozzle and d is the diameter of the tank nozzle.2 The end of the nozzle must not have an extension into the tank. Do not install the device on a high nozzle.CAUTION!If the device is installed on a high nozzle, make sure that the probe does not touch the side of thenozzle (attach the probe end, ...).INFORMATION!It is possible to measure in these conditions with a minimum top dead zone. Use the snapshotfunction to filter the parasite signals from long nozzles. For more data, refer to the Handbook.1 2Figure 2-11: Sockets for threaded process connections1 Recommended installation2 The end of the socket must not have an extension into the tankCAUTION!Do not put the process connection near to the product inlet. If the product that enters the tanktouches the probe, the device will measure incorrectly.12www.krohne.com09/2010 - 4000049805 - QS OPTIFLEX 1300 R08 en
OPTIFLEX 1300 CINSTALLATION 21 23 3Figure 2-12: Do not put the device near to a product inlet1 The device is in the correct position.2 The device is too near to the product inlet.3 If it is not possible to put the device in the recommended position, install a deflector pipe.Figure 2-13: How to prevent build up of product around the process connection1 If product particles are likely to collect in holes, a nozzle is not recommended.2 Attach the flange directly to the tank.3 Use a thread connection to attach the device to the tank.09/2010 - 4000049805 - QS OPTIFLEX 1300 R08 enwww.krohne.com13
Page 1 and 2: OPTIFLEX 1300 C Quick StartGuided R
Page 3 and 4: OPTIFLEX 1300 CCONTENTS4 Start-up 3
Page 5 and 6: OPTIFLEX 1300 CINSTALLATION 22.1 In
Page 7 and 8: OPTIFLEX 1300 CINSTALLATION 22.3 Vi
Page 9 and 10: OPTIFLEX 1300 CINSTALLATION 22.5 Tr
Page 11: OPTIFLEX 1300 CINSTALLATION 2Temper
Page 15 and 16: OPTIFLEX 1300 CINSTALLATION 2INFORM
Page 17 and 18: OPTIFLEX 1300 CINSTALLATION 2Figure
Page 19 and 20: OPTIFLEX 1300 CINSTALLATION 22.10.4
Page 25 and 26: OPTIFLEX 1300 CINSTALLATION 2You ca
Page 29 and 30: OPTIFLEX 1300 CINSTALLATION 22.11 E
Page 31 and 32: OPTIFLEX 1300 CELECTRICAL CONNECTIO
Page 33 and 34: OPTIFLEX 1300 CSTART-UP 44.1 Start-
Page 35 and 36: OPTIFLEX 1300 CSTART-UP 44.3.4 How
Page 37 and 38: OPTIFLEX 1300 CTECHNICAL DATA 55.1
Page 39 and 40: OPTIFLEX 1300 CTECHNICAL DATA 5Othe
Page 41 and 42: OPTIFLEX 1300 CTECHNICAL DATA 5Reso
Page 43 and 44: OPTIFLEX 1300 CTECHNICAL DATA 55.2

Krohne OPTIFLEX 1300 C Level Meter Quickstart Guide ... - Instrumart

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?