Alexandria X-2 Series 2 - Wilson Audio
Alexandria X-2 Series 2 - Wilson Audio
Alexandria X-2 Series 2 - Wilson Audio
- No tags were found...
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
S e c t i o n 4 . 4 – C o n n e c t i n g t h e U p p e r M o d u l e s ’ S i g n a l C a b l espeaker binding post (see Figure 17).• Locate the cable marked “Upper Midrange.” Locate the binding post onthe rear of the upper midrange module (UMRM) labeled “Mid Frequency.”Carefully thread the speaker cable up through the hole located in the wingsupport and through a corresponding hole located on the module supportblade just below the speaker terminal (see Figure 18).• Locate the cable marked “Rear Tweeter.” Locate the binding post on therear of the upper midrange module labeled “Rear Tweeter.” Carefullythread the speaker cable up through the hole located in the wing supportFigure 18 - Connect cables to the upper modules.<strong>Wilson</strong> <strong>Audio</strong> Specialties55