Alexandria X-2 Series 2 - Wilson Audio

A l e x a n d r i a X - 2 S e r i e s 2 O w n e r ’ s M a n u a lA note about these connectors: You risk breaking the binding post if they are overtightened.Use the supplied binding post wrench and tighten until just snug.The upper range signal cables are labeled so that they can be easily attached totheir appropriate module. This is accomplished as follows:• Locate the cable marked “Lower Mid.” Dress this cable through the handleopening and connect this cable to the lower midrange module (LMRM)loudspeaker binding post (see Figure 17).• Locate the cable marked “Front Tweeter.” Dress this cable through thehandle opening and connect it to the high frequency module (HFM) loud-Figure 17 - Cable Dressing.54Wilson Audio Specialties