12.07.2015 Views

Alexandria X-2 Series 2 - Wilson Audio

Alexandria X-2 Series 2 - Wilson Audio

Alexandria X-2 Series 2 - Wilson Audio

SHOW MORE
SHOW LESS
  • No tags were found...

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

A l e x a n d r i a X - 2 S e r i e s 2 O w n e r ’ s M a n u a land heads.The front-to-back location of each module, along with the use of the proper lengthof rear spike of the upper modules, achieves the correct propagation delay and axial responsevis a vis the listener.Install the front pair of short (A length) spikes into the bottom of each module (seeFigure 15).Install the Lower Midrange Module (LMRM)The lower midrange module (LMRM) is installed first. Install the module as follows:• With the front spikes pointing down, carefully lower the LMRM betweenthe alignment wings and set it on top of the woofer enclosure (see Figure16). Ensure that the tether bolts are protruding through the slots providedin the module handle. There are alignment tracks that accommodate thespikes. Refer to the Propagation Delay Table to determine the numberedindent in which to rest the rear spike.• It is now safe to install the rear spike by lifting the module by its rear handleand carefully screwing in the spike.• The rear spike track is indexed numerically. Refer to your marks on thePropagation Delay Table in Section 8.0 to determine the numbered detentin which to rest the rear spike.Install the High Frequency Module (HFM) as follows:• With the front pair of short spikes pointing down, carefully lower the HFMbetween the alignment wings and set the front two spikes on top of theLMRM enclosure. Align the spikes into the alignment tracks. Install the rearspike by lifting the rear of the HFM and carefully screwing it in.• Refer to the Propagation Delay Table in Section 8 to determine the properlocation of the rear spike, noting that the position will be different from theLMRM.52<strong>Wilson</strong> <strong>Audio</strong> Specialties

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!