Variable Displacement Pump A10VSO - Group VH A/S

RE 92 711/03.00 711/09.00Unit Dimensions Size 71N00 model (without through drive)without control valvesBefore finishing your design, please request a certified drawing.Shaft PISO 3019/22 hole flange2,5 4596115LVB45°45°L3318ø125 h8ø32 j6M1010410h91049235-0,2229817L110 5360 217259SWmech. displacementlimiter107,5ø180ø210L1Shaft SShaft 32-4; (SAE C)SAE J744 OCT 83ø1 1/4"5/16-18UNC-2BShaft RShaft 32-4; (SAE C)SAE J744 OCT 83ø1 1/4"5/16-18UNC-2B19193851,658,739,547,555,4pressure angle 30°,14 teeth,12/24 pitchpressure angle 30°,14 teeth,12/24 pitchuseful spline length58,726,277,8ø50View W42,9View Vø2530,252,4SM12; 20 deepfixing hole thread M10; 17 deepfor SAE 1"Bfixing hole thread M10; 17 deepfor SAE 1 1/4"Note:At pressure port B there are two SAE mountings available, each offset by 90°.SAE 1 1/4" Standard pressure range, 3000 psi, for pressures up to 250 bar orSAE 1" Standard pressure range, 5000 psi, for pressures in excess of 250 bar.For operating pressures in excess of 250 bar or for new projects an SAE 1" pressureflange should be used.B Pressure port SAE 1" (Standard pressure range) bolt hole threads to either SAE 1" or SAE 1 1/4" (optional)S Suction port SAE 2" (Standard pressure range)L/L 1Case drain ports M22x1,5 (L 1plugged at factory)Brueninghaus Hydromatik 12/40 A10VSO